Nokia BH-100 Manual page 7

Change the earloop
The headset may be supplied with
earloops in different colors. To change
the earloop, detach it from both sides
of the headset, and attach the new
earloop by inserting the catches at
the ends of the earloop into the
corresponding slots in the headset.
Call handling
To make a call, use your phone in
the normal way when the headset
is connected to your phone.
If your phone supports last number
redialing with the headset, press the
answer/end key twice while no call is
in progress.
If your phone supports voice dialing
with the headset, press and hold
the answer/end key when no call in
progress, and proceed as described
in the user guide of your phone.
To answer or end a call, press the
answer/end key. To reject an incoming
call, press the answer/end key twice.
To adjust the headset volume during
a call, use the volume keys on your
phone.
To switch the call between the
headset and a compatible phone,
press and hold the answer/end key.
Clear settings or reset
To clear the pairing settings from the
headset, switch off the headset, and
press and hold the power key and the
answer/end key until the red and
green indicator lights start to
alternate.
To reset the headset if it stops
functioning, although it is charged,
plug the headset into a charger, and
press the power key and the answer/
end key at the same time.
ENGLISH