8.4.1 Camera Setup, Continued
3. Click on Save to save any changes you have made.
4. Click on Send to transmit the configuration for camera setup to the MaxCom Gold.
Note: this step can be done when all programming is completed using the Send
Receive Centre utility.
5. When finished programming the camera setup, click on the X in the upper right
corner to close the menu.
8.4.2 Preset Titles
1. Access the Preset Titles menu. The menu can be accessed two ways:
Rev. 1
a. Click on the down arrow beside the dome icon and then select Preset Titles.
b. Click on Configure (main menu), then Camera, and then Preset Titles.
80
900.0560
18-July-2005