Table of Contents
Advertisement
[Clear button]
After usages, the valve may be locked with
contamination in the engine that makes the rope
heavy.
In such a case, push the Clear button 1 or 2
times with your finger before starting the engine.
The valve will return to a normal position and the
function is recovered.
(1) Clear button
■ IDLE SPEED ADJUSTMENT
In case the engine stalls or runs at too high speed
when the throttle lever is fully down, use the idle
speed adjust screw for readjustment of the idle
speed.
1. Start the engine and set the engine run at middle
speed for a few minute to worm up.
2. Return the throttle to the idle position and adjust
the idle screw.
(1) Idle adjust screw
(2) Rotation increase
(3) Rotation decrease
Operation
■ STOPPING ENGINE
1. Move the regulator lever to the bottom position.
(1) Stop switch
(2) Throttle lever
2. After checking that the powder/granule stops,
move the throttle lever to the idle position.
3. Press the stop switch until the engine stops
completely.
■ CHARGING CHEMICALS (FERTILIZERS/
AGRICHEMICALS)
WARNING
• To charge chemicals into the sprayer tank,
stop the engine and fully down the adjust
lever. In case the adjust lever is in upper
position (the shutter is opened), it is
dangerous as chemicals will be sprayed
simultaneously when the engine starts.
• Tighten the tank cap securely after filling
chemicals. Loose cap may cause danger of
chemicals spout of the tank during use.
IMPORTANT
• Leaving chemicals in the tank for long time may
cause insufficient output volume or incorrect
shutter action due to moisture. Remaining
chemicals shall be separately put into a storage
container within the same day.
• To carry the sprayer by vehicles, empty the
chemical tank. Otherwise, chemicals may be
tamped down by vibration and cause insufficient
output failure.
English - 13
Advertisement
Table of Contents
