Connect The Power Cord; Choose Your Language - Brother DCP-585CW Quick Setup Manual

2
Load plain A4 paper
a
Pull the paper tray completely out of the
machine.
b
Open the paper tray cover.
c
With both hands, gently press and slide the
paper side guides
guide to fit the paper size.
b
Make sure that the triangular marks
paper side guides
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Check that the paper is flat in the tray.
Important
Do not push the paper in too far.
f
Gently adjust the paper side guides to the
paper with both hands.
2
and then the paper length
a
on the
c
and paper length guide
a
1
3
2
3
g
Close the paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
3

Connect the power cord

b
Important
DO NOT connect the USB cable yet (if you are
using a USB cable).
a
Connect the power cord.
WARNING
The machine must be fitted with an earthed
plug.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
4

Choose your language

a
Press a or b to choose your language and
press OK.
b
Choose Yes or No and press OK.