Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fujitsu D1483
Summary of Contents for Fujitsu D1483
- Page 1 Technical Manual Mainboard D1483 English...
- Page 2 Please contact: • your sales partner • your sales outlet You will find further information in the manuals "Safety" and "Ergonomics". The latest information and updates (e. g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards...
- Page 4 Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Published by Fujitsu Siemens Computers GmbH A26361-D1483-Z120-1-7619 Order No.: Printed in the Federal Republic of Germany AG 1102...
-
Page 5: Mainboard D1483
English Mainboard D1483 Technical Manual November 2002 edition... - Page 6 Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged.
-
Page 7: Table Of Contents
Contents Mainboard D1483 ..........................1 Notational Conventions......................1 Important Notes ..........................2 Information about Boards......................2 List of Features..........................3 Interfaces and connectors ......................4 Layout ...............................4 External Connectors ........................5 Internal Connectors ........................6 LAN Connector A 10/100 82550 - Ethernet Port (External) ..........6 LAN Connector B 1 GbE 82540 - Ethernet Port (External)..........6 System Fan 1/2 and CPU Fan 1/2 Connector (Internal) .............7... -
Page 9: Mainboard D1483
Mainboard D1483 Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your system board. Further information Information on the BIOS Setup and additional descriptions of the drivers are contained in the readme files on your hard disk •... -
Page 10: Important Notes
• Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1483-Z120-1-7619... -
Page 11: List Of Features
Flash BIOS and EEPROMS (on the memory modules) virus protection function • One external serial port (COM1) • Three external USB ports (USB = Universal Serial Bus) • Two external PS/2 interfaces for keyboard and mouse • Real-time clock/calendar with integrated battery backup English - 3 A26361-D1483-Z120-1-7619... -
Page 12: Interfaces And Connectors
FDD connector 13 = CPU fan connector 1 CN9 internal USB port 14 = IDE connector for CD-ROM/DVD drives CN8 connector for LED board / USB 15 = 4 pin power connector JP4 ATX power supply English - 4 A26361-D1483-Z120-1-7619... -
Page 13: External Connectors
5 = LAN connector A 10/100 Mbit 2 = PS/2 mouse port (green) 6 = LAN connector B 1 GbE 3 = PS/2 keyboard port (purple) 7 = Serial interface COM1 (turquoise) 4 = VGA port (blue) English - 5 A26361-D1483-Z120-1-7619... -
Page 14: Internal Connectors
Signal TX + TX - RX + TERMPLANE TERMPLANE RX - TERMPLANE TERMPLANE LAN Connector B 1 GbE 82540 - Ethernet Port (External) Signal TX + TX - RX + TERMPLANE TERMPLANE RX - TERMPLANE TERMPLANE 6 - English A26361-D1483-Z120-1-7619... -
Page 15: System Fan 1/2 And Cpu Fan 1/2 Connector (Internal)
Sense PSU Fan Connector (CN15) Signal Controlled fan voltage (0 V, +6 V ... +12 V) or Fix fan voltage (+12 V) RSB Power Connector (CN5) Signal VCC5SBY IPMI Connector (CN6) Signal IPMBDAT IPMBCLK Not connected English - 7 A26361-D1483-Z120-1-7619... -
Page 16: Ubs Port A/B - Dual Channel
Power Supply ATX Connector (Internal) Signal Signal +3.3 V +3.3 V +3.3 V -12 V +5 V PS on (low asserted) +5 V Powergood (high asserted) -5 V +5 V Auxiliary +5 V +12 V +5 V 8 - English A26361-D1483-Z120-1-7619... -
Page 17: Floppy Connector
Interfaces and connectors Floppy Connector Signal Signal STEP# VCC5 FDD INDEX# VCC5 FDD WDATA# DRV0# VCC5 FDD WGATE# DSKCHG# Not Connected TRKO# Not Connected Not Connected WRTPRT# MTRO# Not Connected RDATA# DIR# DENSEL HDSEL# English - 9 A26361-D1483-Z120-1-7619... -
Page 18: Intelligent Drive Electronics (Ide) Interface (Internal)
Cable select DAK (Low Asserted) IRQ (High Asserted) Not connected ADR 1 (High Asserted) ATA66 Detect (Low Asserted) ADR 0 (High asserted) ADR 2 (High Asserted) CS 1 (Low asserted) CS 3 (Low Asserted) IDE-LED (Low asserted) 10 - English A26361-D1483-Z120-1-7619... -
Page 19: Temperature / System Monitoring
The LAN RJ45 connector is equipped with a green and a yellow LED (light emitting diode). 1 = Green indicator 2 = Yellow indicator LED 1 (left) The adapter is connected to a valid link partner. No link. On (flashing) Data is being transmitted or received. Green 100 Mbit/s English - 11 A26361-D1483-Z120-1-7619... -
Page 20: Lan Connector B 1 Gbe
4 = Bi-color (yellow/green) indicator LED 1 (left) The adapter is connected to a valid link partner. No link. On (flashing) Data is being transmitted or received. LED 2 (right) 10/100/1000 10 Mbit/s Green 100 Mbit/s Yellow 1000 Mbit/s 12 - English A26361-D1483-Z120-1-7619... -
Page 21: Pci Bus Resources
Serial port 1 IRQ 6 Diskette IRQ 7 Printer Port IRQ 8 Real-time clock (RTC) IRQ 12 PS/2 mouse IRQ 13 Numeric processor IRQ 14 Embedded hard disk IDE 1 IRQ 15 Embedded hard disk IDE 1 English - 13 A26361-D1483-Z120-1-7619... -
Page 22: Screen Resolution
Refresh rate (Hz) Max. number of colours 640x480 16,7 mio. 800x600 16,7 mio. 1024x768 16,7 mio. 1057x864 16,7 mio. 1280x1024 16,7 mio. Horizontal values tolerance ±0.3 kHz. Shaded screen resolutions are not supported by LCD monitors (TFT). 14 - English A26361-D1483-Z120-1-7619... -
Page 23: Jumper Settings
Power On Circuit - Jumper JP2 The system is powered on by one of the following mechanisms: IPMI or South Bridge. Power on by IPMI (Default). Power on by South Bridge. Boot Block - Jumper JP3 Normal (Default) Boot Block English - 15 A26361-D1483-Z120-1-7619... -
Page 24: Add-On Modules
3 = PCI slot 1 (riser card) for RSB 2 = PCI slot 2 (low profile) 4 = Memory sockets Slot Sequence No sequence concern for PCI slots. Both PCI slots support 3.3 V operating voltage. 16 - English A26361-D1483-Z120-1-7619... -
Page 25: Upgrading Main Memory
Insert the memory module in the slot while folding the side holders up until the memory module engages (2). Removing a Memory Module Ê Push the clips on the right and left of the compartment outward (1). Ê Carefully remove the memory module from the compartment (2). English - 17 A26361-D1483-Z120-1-7619... -
Page 26: Replacing The Lithium Battery
Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the holder (1). Ê Remove the battery (2). Ê Push the new lithium battery of the identical type into the holder (3) and press it downward until it engages (4). 18 - English A26361-D1483-Z120-1-7619... -
Page 27: Glossary
Universal Serial Bus GMCH Graphics and Memory Controller Video Graphic Adapter Graphics Performance Wake On LAN Accelerator Inter Integrated Circuit IAPC Instantly Available Power Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics IPSEC Internet Protocol Security English - 19 A26361-D1483-Z120-1-7619... - Page 28 Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed.