Canon imagePROGRAF iPF6450 User Manual page 669

iPF6450
Interface EOP Timer
Setup
TCP/IP IPv4
IPv6
NetWare NetWare
Frame Type
Print Service
AppleTalk
Ethernet Auto Detect
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
User's Guide
Setting Item
IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 Set- IP Address
tings
Subnet Mask
Default G/W
DNS Set- DNS Dync update
tings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS Set- DNS
tings Dync up-
date
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
Specify the timeout period before cancellation of print jobs that
cannot be received by the printer.
Choose whether the printer IP address is configured automati-
cally or a static IP address is entered manually.
Specify the protocol used to configure the IP address automati-
cally.
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the net-
work subnet mask and default gateway.
The value that was automatically configured is displayed if you
have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated automati-
cally.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated automati-
Addr cally.
Stateless
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes, choose
Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol. To apply your
changes, choose Register Setting.
Specify the communication method. To apply your changes,
choose Register Setting.
Choose On for automatic configuration of the LAN communica-
tion protocol. Choose Off to use settings values of
Comm.Mode and Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are supported over the
LAN.
Indicates the MAC address.
Description, Instructions
Menu Settings
669