When Loading Custom Size Paper (Non-Standard Size Paper) Or Paper At A Size Of Foolscap Or 16K - Canon LBP5360 User Manual

When Loading Custom Size Paper (Non-Standard Size Paper) or
Paper at a Size of Foolscap or 16K
Perform the following procedure to load custom size paper (non-standard size
paper) or paper at a size of Foolscap or 16K.
You can load paper of the following custom paper sizes.
When loading paper in portrait orientation: Width 148.0 to 215.9 mm; Length
•
210.0 to 355.6 mm
When loading paper in landscape orientation (Only when UFR II Printer Driver is
•
used): Width 210.0 to 215.9 mm; Length 210.0 to 215.9 mm
1
Pull out the paper cassette.
Cassette 1
Pull out the paper cassette gently a.
While holding the paper cassette with
both hands, remove it from the printer
unit as shown in the figure b.
b
CAUTION
Be sure to take the paper cassette out of the printer before loading paper.
If paper is loaded while the paper cassette is partially pulled out, the paper
cassette may drop or the printer may become damaged resulting in
personal injury.
a
Cassette 2
Pull out the paper cassette gently a.
a
While holding the paper cassette with
both hands, remove it from the paper
feeder as shown in the figure b.
b
Printing from the Paper Cassette
4
4-25