Removal steps of speaker assembly
Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (1)
When installing: Make sure that the connector
1040 PCI Express Mini Card for wireless WAN
For access, remove these FRUs in order:
•
"1010 ThinkPad Tablet Pen" on page 36
• "1020 Front-facing camera, rear-facing camera assembly, and internal battery" on page 36
Removal steps of PCI Express Mini Card for wireless WAN
1
In step
, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the
connectors with your fingers and gently unplug them in the direction of the arrows.
3
is attached firmly to the system board.
Chapter 7
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)
.
Removing and replacing a FRU
41