Huawei HWSP-3SA Quick Installation Manual

Welcome to use HWSP-3SA VDSL2 POTS SPLITTER (Hereinafter referred to as
"HWSP-3SA").
1 Overview
HWSP-3SA is centralized CPE VDSL2 over POTS Splitter. Three ports on the splitter
LINE, MODEM and PHONE are with RJ-11 and 6-pole terminal block (Jack and
terminal pins are connected in parallel). The splitter can be mounted on the wall by
screwing or hanging.
Table 1 Pin Function of RJ-11 Jack on HWSP-3SA
Function
Line
Modem
Phone
Figure 1 Pin assignment of RJ-11 jack
2 Mounting
Step 1 Fix on the wall.
If you decide to fix the splitter on the wall, please
Drill two holes of 5×30mm on the proper position on the wall.

Where is convenient for cabling the ADSL modem, computer and Telephone
devices. The distance between two holes must be 67mm.
Drive a fish-like anchor into each hole by hammer.

Quick Installation Guide
HWSP-3SA
VDSL2 POTS SPLITTER
Type
RJ11
RJ11
RJ11
Tip
Pin3
Pin3
Pin3
1
Ring
Pin4
Pin4
Pin4