• Quick Install Guide Note:1.Using a power supply with a different voltage rating than the one included with the DAP-1353 will cause damage and void the warranty for this product. 2.The power supply shall instruct the user not to remove the plug and plug into a wall outlet by itself;...
Provides greater wireless signal rates even at further distances for best-in-class coverage. ULTIMATE PERFORMANCE The D-Link RangeBooster N 650 Access Point (DAP-1353) is a draft 802.11n compliant device that delivers real world perfomance of up to 650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection).
650% faster than 802.11g. • Compatible with 802.11b and 802.11g Devices - The DAP-1353 is still fully compatible with the IEEE 802.11b standard, so it can connect with existing 802.11b PCI, USB and Cardbus adapters.
Section 1 - Product Overview Hardware Overview Connections Receptor for the Power Adapter. LAN Port Pressing the Reset Button restores Connect Ethernet devices such as the access point to its original computers, switches, and hubs. factory default settings. D-Link DAP-1353 User Manual...
A solid light indicates a connection to an Ethernet-enabled device. This LED blinks during data transmission. Power LED A solid light indicates a proper Status LED connection to the power supply. A blinking light indicates that the DAP-1353 is ready. D-Link DAP-1353 User Manual...
This section will walk you through the installation process. Placement of the access point is very important. Do not place the access point in an enclosed area such as a closet, cabinet, or in the attic or garage. D-Link DAP-1353 User Manual...
Section - Installation Wireless Installation Considerations The D-Link RangeBooster N 650 wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.
Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless access point using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the access point (192.168.0.50).
Page 12
Section 3 - Configuration After logging in the Setup > Wizard page will be displayed: D-Link DAP-1353 User Manual...
Section 3 - Configuration Setup Wizard A Setup Wizard is available to quickly and easily configure access point wireless security settings. Click Launch Setup Wizard. D-Link DAP-1353 User Manual...
Page 14
The wizard welcome screen will appear. Click Next to continue. Create a new password and then click Next to continue. Enter your wireless network name (SSID). Auto Channel Scan is enabled by default. Uncheck the option to select a channel. Click Next to continue. D-Link DAP-1353 User Manual...
Page 15
• Good - WEP Encryption • None - No Security Click Next to continue. If you selected Good (WEP) security, select a Key Type, Key Size, and enter a Wireless Security Password: Click Next to continue. D-Link DAP-1353 User Manual...
Page 16
Click Next to continue. At the Setup Complete screen, if you selected Good security, the following screen will show your WEP key. This key should be used by wireless clients connecting to the wireless network: Click Save. D-Link DAP-1353 User Manual...
Page 17
Click Save. If you selected Best security, the following screen will show your Pre-Shared Key. This key should be used by wireless clients connecting to the wireless network: Click Save. D-Link DAP-1353 User Manual...
Section 3 - Configuration Wireless Setup The Wireless Setup page is used to configure the wireless settings for the access point. Wireless security settings are also configured on this page. D-Link DAP-1353 User Manual...
SSID Broadcast: Select Disable if you do not want the SSID to be broadcast by the DAP-1353. This prevents the SSID from being seen by Site Survey utilities, so any wireless clients will have to be pre-configured with the SSID of the DAP-1353 in order to connect to it.
The LAN, or Local Area Network, is your private, internal network. This page allows you to configure the IP settings of the LAN interface for the DAP-1353. The IP address can be changed to your current network IP range. This IP address cannot be seen from the Internet.
Section 3 - Configuration LAN Settings The DAP-1353 is set to Static by My LAN default. Select this option if you do not Connection Is: have a DHCP server on your network, or if you wish to assign a static IP address to the DAP-1353.
If you want to modify these settings and are unfamiliar with them, refer to the explainations below or the Support menu of the access point. D-Link DAP-1353 User Manual...
WMM Function: WMM is QoS for your wireless network. Enable this option to improve the quality of video and voice applications for your wireless clients. D-Link DAP-1353 User Manual...
Section 3 - Configuration Filter Use MAC address filters to allow or deny wireless clients network access based on their MAC address. D-Link DAP-1353 User Manual...
Reject to filter wireless access to the MAC addresses listed in the MAC Address List. MAC Address: Enter MAC addresses to be associated with the selected Access Control option. MAC Address Displays list of currently filtered MAC List: addresses. D-Link DAP-1353 User Manual...
The default value is "allow" which allows data flow from the Ethernet to wireless stations connected to the AP. By disabling this function, all data from the Ethernet to associated wireless devices is blocked while wireless stations can still send data to the Ethernet through the AP. D-Link DAP-1353 User Manual...
Dynamic Host Configuration Protocol assigns IP addresses to wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. D-Link DAP-1353 User Manual...
Enter the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www.dlink. com into IP addresses. Local Domain Enter the domain name of the DAP-1353, if applicable. Name: DHCP Lease The length of time in minutes for the IP lease.
If you want to configure the Guest and Internal networks on Virtual LAN (VLANs), the switch and DHCP server you are using must suppport VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE802.1Q standard. D-Link DAP-1353 User Manual...
VLAN tags. The switch and the DHCP server must support VLAN IEEE802.1Q frames. The access point must be able to reach the DHCP Server. Check with the Administator greading the VLAN and DHCP configurations. D-Link DAP-1353 User Manual...
Section 3 - Configuration User Limit The D-Link DAP-1353 can set limit of wireless client. Using user limit, you can prevent scenarios where the DAP-1353 in your network shows performance degradation because it is handling a heavy wireless traffic. D-Link DAP-1353 User Manual...
When user limit is enabled, select the user limit. User Limit Select user limit in this field , range cover from 0~64. You can specify the limit only when user limit is enabled. (0 - 64): D-Link DAP-1353 User Manual...
The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. D-Link DAP-1353 User Manual...
Page 34
Administrator login. The administrator can make changes to the settings. User Password: Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them. D-Link DAP-1353 User Manual...
If you want to save the current access point configuration settings, click the Save button above. Reboot: Reboots the DAP-1353. D-Link DAP-1353 User Manual...
You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com.
Check the check box to enable SNMP. Community Enter the Public/Private Community string as the password to access the SNMP service. String: Trap Sever IP: Enter the trap server IP when you enable User status notification. D-Link DAP-1353 User Manual...
You will need to set the time zone corresponding to your location. The time can be set manually or the device can connect to a NTP (Network Time Protocol) server to retrieve the time. You may also set Daylight Saving dates and the system time will automatically adjust on those dates. D-Link DAP-1353 User Manual...
Page 39
Check the check box to enable SNMP. Configuration: Set the Date and Enter the NTP server which you would like the DAP-1353 to synchronize its time with. Also, select the interval at Time Manually: which the DAP-1353 will communicate with the specified NTP server.
Section 3 - Configuration Status Device Info This page displays the current information for the DAP-1353. It will display the LAN and Wireless information. LAN: Displays the MAC address and the private (local) IP settings for the access point. Wireless...
Section 3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DAP-1353 on the LAN and Wireless network. The traffic counter will reset if the device is rebooted.
Section 3 - Configuration The log information will include, but not limited to, the following items: • Upgrade Firmware • Client associate and disassociate with AP • Web login If you require D-Link DAP-1353 User Manual...
Page 43
Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice. Mail Server/IP Enter the IP address of the mail server. Address: Enter mail address that you want send to. Email: D-Link DAP-1353 User Manual...
Section 3 - Configuration Client Info The Connected Wireless Client list shows the currently connected wireless clients. This table also displays the MAC address and wireless mode of the connected wireless clients. D-Link DAP-1353 User Manual...
Section 3 - Configuration Support The Support page contains an index of links to help topics for each function of the DAP-1353. D-Link DAP-1353 User Manual...
Section - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1353 offers the following types of security: • WPA-Personal (Pre-Shared Key) • WPA-Enterprise (Extensible Authentication Protocol) •...
WEP Encryption. 5. Next to Key Type, select either Hex or ASCII. Hex (recommended) - Letters A-F and numbers 0-9 are valid. ASCII - All numbers and letters are valid. D-Link DAP-1353 User Manual...
Page 48
7. Click Save Settings to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the access point. D-Link DAP-1353 User Manual...
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DAP-1353 User Manual...
7. Click Save Settings to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-Personal, WPA2-Personal, or WPA2-Auto-Personal on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-1353 User Manual...
6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. Click Apply Settings to save your settings. D-Link DAP-1353 User Manual...
Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-1353 User Manual...
XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1353 User Manual...
Page 54
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless access point. D-Link DAP-1353 User Manual...
XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-1353 User Manual...
Page 56
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-Personal settings are correct. The WPA-Personal passphrase must be exactly the same as on the wireless access point. D-Link DAP-1353 User Manual...
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
Page 58
• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management.
Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
Page 61
• Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DAP-1353 User Manual...
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DAP-1353 User Manual...
DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-1353 User Manual...
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-1353 User Manual...
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DAP-1353 User Manual...