Turning The Phone On And Off; Displaying Your Phone Number - Hitachi SH-G1000 User Manual

Turning the Phone ON and OFF

Press the Power button to turn the device on, and then press and hold
1.
the Power button to turn the phone on. To turn the phone off, press
and hold the Power button again. To turn the device off, press the
Power button again.
Tip:
You may also press and hold the End key to turn the phone on and off.
Tip:
You can also turn the phone on by tapping the Signal indicator,
instead of pressing and holding the Power button. If you want to make
absolutely sure you do not receive calls, such as when you are on an
airplane, tap the Signal Indicator again and then tap
(The Signal Indicator, located in the navigation bar, indicates whether
your phone is on, receiving a signal while on, turned off, and so on.)
Press the Talk button. The dialer screen appears and the device is ready
2.
to make a phone call.
When the phone is on, the LED for Phone Power blinks at intervals of
approximately five seconds.

Displaying Your Phone Number

In case you forget your phone number, your PCS Phone can remind you.
To display your phone number:
Tap
Tools
Tip:
You may use the following procedure instead: Tap
On the Personal tab, tap Phone, then the Phone tab on the bottom.
Section 2: Understanding Your Device
72 2B: Using Your Phone
, , then the
Options
tab on the bottom.
Phone
Turn phone off
.
, then Settings.