Enabling/Disabling Snapshot - Hitachi MK-97DF8018-00 User Manual

Enabling/Disabling SnapShot

To enable/disable SnapShot
1. In the Navigator 2 GUI, select the array where you want to enable
SnapShot and click the Show & Configure Array button.
2. In the tree view, click Settings, then click Licenses.
3. Select SnapShot in the Licenses list, then click the Change Status
button at the bottom of the page.
The Change License screen appears.
•
4. To enable, click the Enable: Yes check box.
To disable, clear the Enable: Yes check box.
•
NOTE: When disabling, SnapShot pairs must be deleted.
5. Click OK.
•
•
6. In the confirmation screen that appears for the enabling and disabling
actions, click OK. The Reboot Array message appears confirming the
operation is complete. Before beginning the restart process, make sure
that the host has stopped accessing data.
4–2
Hitachi Simple Modular Storage Copy-on-Write SnapShot User's Guide
Enabling and Disabling SnapShot