Ez Setup During First Power On - Hitachi 27CX01B User Manual

EZ SETUP DURING FIRST POWER ON

MUTE
Press Mutes sound.
Press again Restores sound.
• CLOSED CAPTION appears when sound is muted.
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
EZ SETUP DURING FIRST POWER ON
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels.
Please perform the following instructions before you press the power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 5-6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE mode will be
displayed
2 Press CH UP ( ) or DOWN ( ) to select "ENGLISH", "SPANISH (ESPANOL)" or "FRENCH (FRANCAIS)".
3 Press VOL ( + ) or ( - ) to access the EZ SETUP mode.
4 Press VOL ( + ).
11