Introduction; Supplied Accessories; Symbols Used In This Manual; About The Discs - Hitachi DV-P745U Instruction Manual

INTRODUCTION

Supplied Accessories

• Remote control DV-RM745U (TS18852)
• Two AA batteries
• VIDEO/AUDIO cables approx.3 feet(100cm) long(TE14751)

ABOUT THE DISCS

Playable Discs

The following discs can be played back on this DVD player.
¡ ¡
DVD video DVD-R*
*Depending on the types or the writing method of the medium, some discs may not be played.
• Some DVD-R or CD-R/RW discs made on personal computers or DVD recorders may not be played back properly due to
factors such as scratches, dirt or special properties of the disc.
• Discs made on personal computers may not be played back properly due to different environments or the settings of the
application you use. We recommend always to use the standardized, properly formatted discs. (Please contact the sales
agency for more details).
• You can play back discs which bear the marks on page 18. If you use nonstandardized discs, this
unit may not play them back. Even if they are played back, the sound or video quality will be compro-
mised.
• This player conforms to the NTSC color system. You cannot play discs recorded in other color sys-
tems such as PAL or SECAM.
• Some discs include region codes as shown on the right.
• The number inside the symbol refers to a region of the world, and a disc encoded in a specific
region format can only be played back on DVD player with the same region code.
For Customer Use: Read carefully the information located at the bottom of your DVD player and enter below the Serial No.
Retain this information for future reference.
Model No. DVD player
Serial No. __________________________
¡ On the following discs, only the sound can be
heard (picture cannot be viewed).
CDV
CD-G
¡ NEVER play back the following discs. Otherwise,
malfunction may result!
DVD-RAM
CD-I
Photo CD
Video CD
DVD with region codes other than 1 or ALL

Disc Types

[Audio CD]
Data on an Audio CD is divided into sections called "tracks",
each of which is given a track number.
Example
Track 1 Track 2 Track 3
¡ ¡
Audio CD CD-R/RW*
Track 4 Track 5 Track 6

Symbols Used in this Manual

The following symbols appear below in some headings and
notes in this manual, with the following meanings!
DVD : Description refers to playback of DVD video discs.
: Description refers to playback of audio CDs.
CD
MP3 : Description refers to playback of MP3 discs.
: Description refers to the items to be set in the QUICK mode.
QUICK
¡
MP3 disc
DVD-ROM for personal computers
CD-ROM for personal computers
¡ On the following disc, the sound MAY NOT be
heard.
Super Audio CD
Note: Only the sound recorded on the normal
CD layer can be delivered.
The sound recorded on the high density
Super Audio CD layer cannot be deliv-
ered.
¡ Any other discs without compatibility indications.
[MP3 disc]
MP3 data is divided into sections called "groups", and then
into subsections called "tracks", each of which is given a
group or track number.
Example
Group 1
Track 1 Track 2
– 4 –
1
Group 2
Track 3 Track 4 Track 5 Track 6
EN