Dell PowerConnect 5224 System User's Manual page 37

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Class of Service/Queue Scheduling page.
Command
queue bandwidth weight1...weight4
show queue bandwidth
Example
Console(config)#queue bandwidth 1 4 16 64
Console(config)#exit
Console#show queue bandwidth
Queue ID Weight
-------- ------
0 1
1 4
2 16
3 64
Console#
Layer 3/4 Priority
You can assign Layer 3/4 priority to traffic in the switch by considering the settings in the Type of Service (ToS) field in the IP header of a frame. The ToS field
can contain an IP Precedence or the more recently released Differentiated Services Code Point (DSCP) value, depending on whether you have DSCP or IP
Precedence-aware devices in your network. You can use the Layer 3/4 Priority page to identify IP traffic priorities and map the priorities to the CoS values in
the priority tag of each frame.
The following figure shows the ToS field structure for IP Precedence and IP DSCP.
Usage
Assigns WRR weights to the four CoS priority queues.
Use the no form command to restore the default weights.
Displays the WRR bandwidth allocation for the four CoS priority queues.