Table of Contents
Advertisement
Configuration
Video Type
Users can select "NTSC" or "PAL" according requirement.
Flicker by fluorescent light can be reduced by selecting PAL mode if the public
power is 50Hz, or NTSC mode if the power is 60Hz.
Figure 4-44 Video Type
Note: Analog video output is not available.
Import Configuration Settings
This function is designed to upload configuration setting from the client
computer to network cameras.
Figure 4-45 Import Configuration Settings
Export Configuration Settings
This function is designed to export configuration settings to the client computer.
Figure 4-46 Export Configuration Settings
Set to Factory Default
This function is designed to reset all configuration settings into factory default.
Figure 4-47 Set to Factory Default
Network Camera Reboot
This function is designed to reboot the camera.
38
Advertisement
Table of Contents
