LG ND5630 Owner's Manual page 21

Using Air Direct with Security mode
5. Launch Apple Safari browser or Microsoft
Internet Explorer browser on your iPod touch/
iPhone/iPad or PC/MAC.
6 Type in "192.168.1.1" at the browser address bar
and confirm.
7. Set security mode and insert password.
- hexadecimal (0-9, A-F) 10 or 26 digits.
- 5 or 13 ASCII characters.
8. Tap or click "OK"
9. In the network list, find and select "LG AIR
DIRECT XXXXXX" again.
10. If you want to get back to non-security mode,
select security type as None.
,
Note
y If you want to deactivate Air Direct function,
press AIR DIRECT/RESET.
y If you want to initializes Wi-Fi network's
Security Mode, press and hold AIR DIRECT/
RESET.
y When you change the security mode, please
disconnect the existing connection and then
reconnect unit to AirPlay-enabled device.
y If connection setup fails to complete, press
and hold AIR DIRECT/RESET.
Option 3 : Using Webpage
The new Wi-Fi network created by this unit only
allows access of one Wi-Fi enabled device. To avoid
interference from any other Wi-Fi devices, you are
recommended to temporarily disable the Wi-Fi
function on your other Wi-Fi devices.
,
Note
y "LG AUDIO Setup XXXXXX" is the temporary
and assistant Wi-Fi network for connection
of this unit to your home Wi-Fi router.
y While your iPod touch/iPhone/iPad or your
Wi-Fi enabled PC/Mac is connecting to "LG
AUDIO Setup XXXXXX" network, you can not
use Internet.
1. Press PFUNCTION on the remote control or
F on the unit to select AirPlay function.
2. Press and hold Wi-Fi SETTING. "AirPlay"
icon will blink with white and amber color
alternately.
3. After 20 seconds, select "LG AUDIO Setup
XXXXXX" in the network list on your iPod/
iPhone/iPad or PC/MAC. "AirPlay" icon will blink
quickly.
,
Note
y If "LG AUDIO Setup XXXXXX" is not in the
list, try to scan the available Wi-Fi networks
again.
y If you want to deactivate Webpage function,
press and hold Wi-Fi SETTING.
Operating 21
2