00CP-S420/CP-X430 03.9.2 0:08 PM ページ 2 Liquid Crystal Projector CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. BEDIENUNGSANLEITUNG Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung aufmerksam. MANUEL D'UTILISATION Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 1 Liquid Crystal Projector USER'S MANUAL USER'S MANUAL WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.
Contents of Package WARNING • Keep the original packing material for future reshipment. To avoid penetration of foreign objects, do not put the projector into a case or bag together with anything except the accessories of the projector, signal cables and connectors.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 3 Part Names Carrying Handle AC Inlet (to the Power Cord) Power Switch Foot Adjuster Ventilation Openings (Intake) Control Panel STANDBY/ON Button KEYSTONE Button Foot Adjuster Button Filter Cover Air Filter and Intake for the Cooling Fan...
Page 5
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 4 Part Names (continued) STANDBY/ON Button VIDEO Button Disk Pad Used to operate the mouse shift function and left click function. AUTO Button MENU Button MENU SELECT Button Used to click the left mouse button.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 5 Loading the Batteries CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause battery cracking or leakage, which could result in fire or personal injury.
• Please basically use liquid crystal projector at the horizontal position. If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and cause damage. Be especially careful not to install it with ventilation holes blocked.
• Before connecting, turn off to all devices to be connected, except for the USB cable. • The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 8 Power Connection CAUTION • Be carful in handling the power cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 9 OPERATIONS OPERATIONS POWER Indicator Power Switch Power ON Power OFF WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that the equipment is used safely.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 10 Basic Operation Table 3 . Basic Operation Item Select Input Signal ( RGB IN 1→RGB IN 2→DVI→ VIDEO IN → S-VIDEO IN → COMPONENT VIDEO (→ RGB IN 1) Select RGB Input : Press the RGB button.
Page 12
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 11 Table 3. Basic Operation (continued) Item VOLUME Volume Adjustment : Press the VOLUME Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the MUTE MUTE mode. Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE),...
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 12 Setup Menu Table 4. Setup Menu Item Adjustment: Dark BRIGHT Adjustment: Weak CONTRAST Adjustment: Down V POSIT Adjustment: Left H POSIT Adjustment: Left H PHASE • Adjust to eliminate flicker. Adjustment: Small • The image may not be displayed correctly if the horizontal H SIZE size is excessive.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 13 Input Menu Table 5. Input Menu Item Automatic Adjustment at RGB Input: Select the EXECUTE with the button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 14 Image Menu Table 6. Image Menu Item Select Blank Screen: Select the screen in case of the BLANK mode with the button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 15 Options Menu Table 7. Options Menu Item VOLUME Reduce MENU COLOR Select Menu Background Color: Select with the LANGUAGE Select Menu Display Language: Select with the Set AUTO OFF: Set 1~99 minutes with the automatically enters the standby mode when a signal is not received for the set time.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 16 No Signal Menu Table 8. No Signal Menu Item Reduce • When this function is used, audio input is automatically switched to video. The audio input can VOLUME be switched by moving the DISK PAD left and right during the display of the volume adjustment bar.
• Should the lamp burst (accompanied by a big bursting noise), perform ventilation sufficiently, and exercise maximum caution not to inhale any gas out of the projector’s air vent or not to let it enter your eyes or mouth.
Page 19
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 18 Replacing the Lamp CAUTION • Ensure that screws are tightened properly. Screws not tightened fully may result in injury or accidents. • Do not use the projector with the lamp cover removed. Resetting the Lamp Timer •...
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 19 Air Filter Cleaning the air Filter Replacing the Air Filter CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 20 TROUBLESHOOTING TROUBLESHOOTING OSD Message Table 9. OSD Message Message CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. CHANGE THE LAMP AFTER REPLACING LAMP, RESET THE LAMP TIME. THE POWER WILL TURN OFF...
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 21 Indicators Message Table 10. Indicators Message POWER LAMP TEMP indicator indicator indicator Lights Turns off Turns off orange Blinks Turns off Turns off green Lights Turns off Turns off green Blinks Turns off Turns off...
01CP-S420/CP-X430 03.9.2 0:08 PM ページ 22 Symptom Table 11. Symptom Symptom The main power switch is not turned on. The power cord is disconnected. The power is not turned on. The main power was disconnected during operation by the power failure and so on.
Video input Red Video input Green Video input Blue Ground Ground Red Ground Green Ground Blue 2. Digital Receptacle Connector (DVI) (*CP-X430 only) Pin No Signal T.M.D.S. Data 2 - T.M.D.S. Data 2 + T.M.D.S. Data 2 / 4 Shield DDC Clock DDC Data Analog V.
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 2 Example of computer signal Resolution fH (kHz) H × × V 640 × 350 37.9 640 × 400 37.9 720 × 400 37.9 640 × 480 31.5 640 × 480 35.0 640 × 480 37.9...
Page 28
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 3 Initial set signals Back porch b Display interval c Sync a Computer / Horizontal signal timing (µs) Signal VGA-1 (85Hz) VGA-2 (85Hz) TEXT VGA (60Hz) Mac 13"mode VGA (72Hz) VGA (75Hz) VGA (85Hz) SVGA (56Hz)
Page 29
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 4 Connection to the Mouse Control 1. PS/2, ADB or Serial Mouse 2. USB Mouse NOTE PS/2 Mouse CONTROL Terminal D-sub 15-pin shrink jack TECHNICAL - 4 Projector Computer DATA SEL0 DATA Mouse jack Mini DIN 6-pin...
Page 30
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 5 ADB Mouse CONTROL Terminal D-sub 15-pin shrink jack Serial Mouse CONTROL Terminal D-sub 15-pin shrink jack USB Mouse USB jack (B type) Projector — DATA DATA Projector Computer ( POWER ON ) DATA Projector...
Page 31
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 6 RS-232C communication Control jack D-sub 15-pin shrink jack Communications setting 19200bps, 8N1 1 Protocol 2 Header 3 Command data byte_0 Action Action Classification INCREMENT DECREMENT EXECUTE TECHNICAL - 6 Projector Computer SELO Command data chart...
Page 32
Using the projector default settings (Reset Command) Increasing the projector setting value (Increment command) Decreasing the projector setting value (Decrement command) When a command sent by the projector cannot be understood by the computer When data sent by the projector cannot be practice •...
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 8 Names Operation type Orange Green Blue Purple Blank Color White Black MyScreen ORIGNAL Normal H Inverse Mirror V lnverse H&V Inverse Normal Freeze Freeze Orange Green Blue Menu Color Purple Transparent Gray ORIGNAL Startup...
Page 34
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 9 Names Operation type Magnify Increment Decrement Auto off Increment Decrement Brightness Reset Execute Contrast Reset Execute V.Position Reset Execute H.Position Reset Execute H.Size Reset Execute Color Balance R Reset Execute Color Balance B Reset...
Page 35
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 10 Names Operation type Normal Mute Mute Brightness Increment Decrement Contrast Increment Decrement Color Increment Balance R Decrement Color Increment Balance B Decrement Increment Keystone_V Decrement Increment Keystone_H Decrement 4:3, Full 16:9 Aspect Small Default...
Page 36
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 11 Names Operation type Sharpness Increment Decrement Increment Color Decrement Increment Tint Decrement Auto NTSC SECAM Video Format NTSC 4.43 M-PAL N-PAL 1080i HDTV 1035i Large PinP Size Small Upper left Upper right bottom left...
Page 37
09CP-S420/CP-X430 03.9.9 2:13 PM ページ 12 Names Operation type Sync on G NORMAL WHISPER WHISPER NORMAL CINEMA GAMMA DYNAMIC IR Remote Front IR Remote Rear IR Remote Top • NOTE TECHNICAL - 12 Command data chart Header BE EF 06 00...
Page 38
FCC (Federal Communication Commission) equipment provided that the following conditions are met. The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the...
Page 39
00CP-S420/CP-X430 03.9.2 0:08 PM ページ 1 Hitachi America, Ltd., Digital Media Division 2000 Sierra Point Parkway, MS760 Brisbane, CA 94005-1835 USA Tel: +1-800-225-1741 Fax: +1-650-244-7776 www.hitachi.us/digitalmedia Hitachi Canada, Ltd. 6740 Campobello Road, Mississauga, Ontario, L5N2L8 CANADA Tel: +1-905-821-4545 Fax: +1-905-821-1101...