Table of Contents
Advertisement
Transportation
• Keep the original packing materials to facilitate safe transportation of the
drive.
• Always remove the tape/media cartridge before moving the drive. After
removing the drive from the computer, repack the drive into its original
packing.
Useable Cartridges
The AITi200 can be used with data cartridges marked with the AIT-E
Turbo, AIT-1 Turbo, AIT-2 Turbo, AIT-1, or AIT-2 logo.
The AITi100 can be used with data cartridges marked with the AIT-E
Turbo, AIT-1 Turbo, or AIT-1 logo.
The AITi50 can be used with data cartridges marked with the AIT-E Turbo
logo.
Note
• Be sure to use only the cartridges designed specifically for AIT.
• Do not use anything but AIT cartridges with this system, as doing so can
damage the AIT drive. Although commercially available 8mm videotapes
resemble AIT cartridges in appearance, they have entirely different
specifications and cannot be used.
SCSI Termination
The AITi200, AITi100, and AITi50 conform to the Microsoft PC97
standard, which requires the internal- (naked) drive to be terminated with
an external terminator.
Microsoft PC97 SCSI requirements
SCSI peripherals must not terminate the bus. Both internal and external
cable ends are instead terminated by plug-in connectors.
Host Computer Wide SCSI
68p cable
Example of SCSI setup
Terminator
This drive
9
Advertisement
Table of Contents
