Accessories; Standard Accessories - Hitachi KM 12VC Instruction And Safety Manual

WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

1. Model M12VC, M12SC
(1) 1/4" Collet Chuck (Code No. 323-293)
(2) Template Guide Adapter (attaches
to the router) (Code No. 323-272)
(3) Centering Gauge (Code No. 323-296)
(4) 16 mm Wrench (Code No. 323-294)
(5) 23 mm Wrench (Code No. 323-295)
2. Model KM12VC, KM12SC
(1) 1/4" Collet Chuck (Code No. 323-293)
(2) Template Guide Adapter (attaches to
the router) (Code No. 323-272)
(3) Centering Gauge (Code No. 323-296)
(4) 16 mm Wrench (Code No. 323-294)
(5) 23 mm Wrench (Code No. 323-295)
(6) Large Hole Sub Base (Code No. 323-297)
(7) Template Guide (Fig. 19)
(8) Lock Nut (Code No. 323-305)
(9) Chip Cover (Code No. 323-292)
(10) Case (Code No. 323-358)

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool. The use of any other attachment or accessory can be
dangerous and could cause injury or mechanical damage.
A
B
Code
A
No.
1/4"
323-298
(6.5 mm)
9/32"
323-299
(7 mm)
11/32"
323-300
(8.7 mm) (11.1 mm) (4 mm)
13/32"
323-301
(10.3 mm) (12.7 mm) (8 mm)
17/32"
323-302
(13.5 mm) (16 mm) (14.3 mm)
21/32"
323-303
(16.6 mm) (19.1 mm) (14.3 mm)
5/8"
323-304
(16 mm) (20.2 mm) (14.3 mm)
Fig. 19
English
C
B C
5/16" 5/32"
(8 mm) (4 mm)
3/8" 5/16"
(9.5 mm) (8 mm)
7/16" 5/32"
1/2" 5/16"
5/8" 9/16"
3/4" 9/16"
51/64" 9/16"
17