Setting The Daily Timer; Setting The Sleep Timer - Hitachi AX-M140 Instruction Manual

Setting the Daily Timer

In standby mode, you can use the daily timer setting to turn the unit on automatically at a
l
certain time everyday under standby mode. When the setting timer is on, the timer
indictor " " will display on the VFD, however the clock must be set correctly for the timer
function to work.
- In standby mode, press the timer button (
- Set the hour with the
- Press the timer button (
- Set the minute with the
- Press the timer button (
(daily timer set is in effect) or "OFF" (daily timer set is to cancel) by pressing the
button or
D
Note:
* You can only set the daily timer only in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to
time display.
* The sound source of the "timer on" mode is the same as the sound source when the unit
was turned off by the standby switch.
To confirm the daily time
Press the timer button (
second until the display returns to the time display.
To cancel the daily timer setting
In standby mode, repeatedly press the timer button (
VFD, then you can set the daily timer to "OFF" by pressing the
daily timer will be cancelled).
Turning off the system also cancels the daily timer.

Setting the Sleep Timer

Use the sleep timer to turn the system off after a some time when playing. By setting the
l
sleep timer, you can fall asleep and know that your system will turn off by itself rather than
playing all night.
- Play a disc or tune in to the desired station.
- If you set the sleep timer first, each time you press the sleep button (
the number of minutes shown on the VFD in this sequence:
If you change the sleep timer, each time you press the sleep button (
the number of minutes shown on the VFD in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the
display as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When pressing the sleep button (
seconds the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (
It can also cancel the sleep timer by restart set the clock or turning off the system.
button or
C D
), minute indicator will blink.
SLEEP
button or
C
), the selected time is set. Then set the daily timer to "ON"
SLEEP
button.
) in standby mode, the daily time is displayed. Wait for a
SLEEP
- -
10 20
- -
5 10 20
SLEEP
SLEEP
- 25 -
) twice, hour indicator will blink.
SLEEP
button.
button.
D
) until the "ON" will display on the
SLEEP
C
...
80 90 00
...
80 90 00
), the remaining sleep time is displayed. After a few
) until the "00" displays on the VFD.
C
button or button (the
D
), it changes
SLEEP
), it changes
SLEEP