Special Playback Effects; Still Playback (Pause); Frame Advance; Skip Playback - Hitachi 13VR3B Operating Manual

Hitachi operating guide tv/vcr combo 13vr3b, 20vr4b

Hide thumbs Also See for 13VR3B:

Table of Contents

SPECIAL PLAYBACK EFFECTS

Press PAUSE to still the tape during play. The picture will "freeze" you may see

some minor noise or interference on the screen. This is normal.

After 5 minutes in PAUSE mode, the VCR automatically switches to STOP mode

to protect the tape.

NOTE:

If the picture jitter, use the "TRACKING" Adjustment to stop the jitter.

To resume play, press PLAY or PAUSE again.

When you press F.ADV button on the remote control during still (play-pause)

mode, one frame at a time can be seen.

When you press the F.ADV button during play-back, the tape is searched forward

for about 1 minute of recording time and then the normal play-back mode

resumes.

During playback, you can play the tape in variable-speed slow-motion using the

SLOW SPEED buttons on the remote control.

• Press the SLOW SPEED buttons on the remote control to begin slow-motion

playback. Press the SLOW SPEED + button to increase the slow-motion speed, or

press the SLOW SPEED - button to decrease the slow-motion speed. Press the

PLAY button to return to normal playback.

• It is normal to occasionally see some streaks in the picture during slow-motion

viewing. Select the Tracking Adjustment mode and adjust the Tracking.

Table of Contents

20vr4b