Viewing The On-Screen Display; Indexing With The Time Counter - Hitachi FX632A Owner's Manual

Remote Control Illustration.

VIEWING THE ON-SCREEN DISPLAY

•
Switching between the clock, time counter and time of
remaining tape
Press DISP while the on-screen display is displayed. The on-screen display switches in the order below together
with the VCR's display.
Press the DISP button to see the clock.
Remote Control Illustration.
Press the DISP button a second time to see just the time counter.
On-screen Display Illustration
Notes:
• The linear time counter operates only if there is something recorded on the tape.
• The counter changes to 0:00:00 when the tape is ejected.
Press the DISP button a third time to see the tape remaining time.
On-screen Display Illustration
Note: Immediately after the tape is inserted, "
started, the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time
will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
• The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than
T-30/60/90/120/140/160/180/210.
• The remaining time may not be displayed correctly during fast forwarding or rewinding.

INDEXING WITH THE TIME COUNTER

•
To find specific sections on a tape
Indexing with the Time Counter
You can set the time counter to memorize a certain point in the video programming, and you can return to that
point automatically.
-:--
" will appear. 2 minutes after playback or recording is
39