Advanced Operations; Controlling Your Tv With The Vcr's Remote; Programming The Remote Control - Hitachi VT-M281A Owner's Manual

Advanced Operations

Advanced Operations
This section explains how to use the VCR's remote control to operate your
TV. It also shows you how to hook up a cable box and how to connect a
second VCR for a complete home entertainment system.

Controlling Your TV with the VCR's Remote

The remote control is designed to be compatible with many televisions
and cable converters, but will not work with every one made. If your TV or
cable box does not respond the way it should when you program it as
explained below, this remote may be incapable of operating it.
Once you have programmed the remote, you won't have to do it again
until you change the batteries.
This Hitachi remote control can be used with your TV as well as the VCR,
as long as your TV comes with a remote control. This feature comes in
handy - you don't have to juggle two remotes.
The remote control is compatible with the fourteen makes of TVs listed
next page - but don't be alarmed if yours is not on our list. You may still be
able to program the remote for your TV.
Every TV that comes with a remote control is set up to detect certain
infrared signals. You need to program the VCR's remote control to send
signals that your TV will recognize and respond to. Here's what to do:

Programming the Remote Control

Turn the television on (any channel is okay).
Aim the VCR's remote control at your TV set. Hold down the TV button
(not the TV/VCR button) while you press the number corresponding to
your brand of television as shown in the chart (page 37).
For example, if you have an RCA television, press TV and 0 at the same
time. If this button combination sends a signal that matches with your TV,
the channel will change on the TV, and you'll know the remote is set to
control the television.
If that button combination does not change the TV channel, go through
the whole list of button combinations one by one until you find one that
does change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the number
buttons. One of them may work for you.
If the TV channel still doesn't change after going through all the button
combinations listed, it is likely that you will not be able to program this
remote control for your TV.
TV Brands
Hitachi
Zenith
Sony
Magnavox
Sanyo
Compatibility
Press TV and This Number
1
2
3
4
5
32