Hitachi cordless hammer Instruction And Safety Manual page 22

English
2. Drilling anchor holes (Rotation + Striking)
Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper
Shank)
External dia. Code No.
7/16"
(11 mm)
31/64"
(12.3 mm)
1/2"
(12.7 mm)
9/16"
(14.3 mm)
73/128"
(14.5 mm)
11/16"
(17.5 mm)
1/2" (13 mm) Hammer Drill chuck and Chuck wrench
For drilling operations when using a straight shank bit for impact driling with a rotary
hammer
Impact Drill
Application
Straight shank Bit
Name
1/2" (13 mm) Hammer Drill Chuck
Chuck wrench
Rubber Cap
22
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
Taper mode
944460
Morse taper
944461
993038
944462
944500
944463
Rubber cap

1/2" (13 mm) Hammer

Drill Chuck (SDS-plus

shank) (includes Chuck
wrench)
Code No.
303617
(No. 1)
A-taper 303619
B-taper 303620
Chuck wrench
Code No.
303332
303334
303335
Applicable drill bit
7/16" (11 mm)
31/64" (12.3 mm)
Drill bit
1/2" (12.7 mm)
(Taper
9/16" (14.3 mm)
shank)
73/128" (14.5 mm)
11/16" (17.5 mm)
Taper shank adaptor formed A-
taper or B-taper is provided as an
optional accessory, but drill bit for
it is not provided.