Seize The Line First, Then Dial - Siemens Gigaset M2 Professional Operating Manual

Step by Step
CALLBACK
Charging the battery pack
You may only use the charging shell provided for the
handset.
The handset charges when sitting in the charging shell,
even when deactivated. If the handset is active, the
charging status display flashes on the display.
If the handset deactivates because the battery pack is
flat, it automatically reactivates and is ready for opera-
tion as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be
entered first to allow charging to start.
Language
If your preferred language for the display texts is not
set, you can set this yourself (

Seize the line first, then dial

or
When the handset is idle: Press and hold down the Talk
key or press the Speakerphone key.
o
Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error Press the On-hook key.
either:
p
The user answers. You conduct the call.
or:
[
The user is busy. You can save a callback request
( Page 6).
Press the On-hook key to end the operation.
Conducting calls – the basic functions
Page 21).
3