D-Link AirPlus Xtreme G DWL-2000AP Manual page 15

High-speed 2.4 ghz wireless access point

Hide thumbs Also See for AirPlus Xtreme G DWL-2000AP:

Table of Contents

Using the Configuration Menu (continued)

Home > Wireless

SSID-

Service Set Identifier (SSID) is the name designated for a specific wire-

less local area network (WLAN). The SSID's factory default setting is

default. The SSID can be easily changed to connect to an existing

wireless network or to establish a new wireless network.

Channel-

6 is the default channel. All devices on the network must share the same

channel.

Wired Equivalent Privacy (WEP) is a wireless security protocol for Wire-

WEP-

less Local Area Networks (WLAN). WEP provides security by encrypt-

ing the data that is sent over the WLAN. Select Enabled or Disabled.

Disabled is the default setting. (Note: If you enable encryption on the

DWL-2000AP make sure to also enable encryption on all the wireless

clients or wireless connection will not be established.)

WEP

Encryption-

Select the level of encryption desired: 64-bit, or 128-bit

Key Type-

Select HEX or ASCII

Hexadecimal digits consist of the numbers 0-9 and the letters A-F

ASCII (American Standard Code for Information Interchange) is a code for representing

English letters as numbers from 0-127

Keys 1-4-

Input up to 4 WEP keys; select the one you wish to use.

Apply-

Click Apply to save the changes.

Table of Contents