Frigidaire FEB24S2A S Specifications page 3

Single Wall Oven Specifications
• Product Shipping Weight (approx.) – 130 Lbs.
• Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz
AC only electrical supply with ground required on separate circuit
fused on both sides of line.
• Connected Load (kW Rating) @ 240 / 208 Volts = 3.4 / 2.6 kW
Amps @ 240 / 208 Volts = 14.2 / 12.5 Amps
•
• Recommended Circuit Breaker – 20 Amps
Always consult local and national electric codes.
•
• Minimum 19-3/8" clearance for oven door depth when open.
• Minimum required distance from floor is 31".
• Minimum 23-1/2" deep cutout dimension is critical for proper
installation, to ensure that oven's faceplate will fit flush against
cabinet front.
• To adapt oven to fit cutout height greater than 28-1/8", add one
2"-wide wood shim of appropriate height to each side of opening
under oven side rails. Lifting oven will hide larger cutout opening at
top and oven's bottom trim will hide shims at bottom.
USA 10200 David Taylor Drive Charlotte, NC 28262
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
FEB24S2A 09/13
1-800-FRIGIDAIRE frigidaire.com
• •
1-800-265-8352 frigidaire.ca
• •
© 2013 Electrolux Home Products, Inc.
Single Wall Ovens
• Full oven base of solid plywood or similar material required,
capable of supporting 150 Lbs.
Base must be level and cabinet front must be square.
•
• Single Wall Oven is NOT approved to be used in stackable or
side-by-side installation.
• Single Wall Oven is NOT approved to be used in under-counter
installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Accessories information available
on the web at frigidaire.com
FEB24S2A S / B 24" Electric
Specifications
subject to change.