Introduction; Important - Fujitsu DynaMO 1300 User Manual

Introduction

Thank you for purchasing the DynaMO 2300 SCSI/DynaMO 1300 SCSI magneto-optical disk drive (hereafter
referred to as the MO drive). The MO drive is a high-performance, high-reliability drive. Please read this
manual before using this product and check that all the components shown on the packaging box are
included. If any components are missing, please contact the dealer where you purchased the product.

Important

1 Unauthorized transfer or duplication of all or any part of this document is forbidden.
2 Where required for product improvements, etc., this product and this manual are subject to change without
prior notice.
3 FUJITSU LIMITED accepts no responsibility whatsoever with regard to third-party rights or other rights
originating from the use of data described in this manual.
4 Every care and effort has been taken in the manufacture and production of this product and the contents
of this manual. In the unlikely event that a problem should exist, contact FUJITSU LIMITED at your earliest
convenience.
5 Note that FUJITSU LIMITED accepts no liability whatsoever for the loss of or damage to any data as a
result of the use of this product. Important data should be backed up on a regular basis as a precautionary
measure.
6 Further to item 5, FUJITSU LIMITED accepts no liability whatsoever for compensation with regard to
systems, data or MO disks. Further, FUJITSU LIMITED is not liable for any compensation with regard to
losses due to software or hardware faults, incorrect operation, or any other causes.
7 In no event should this product be disassembled. If this product is disassembled, FUJITSU LIMITED shall
not be required to provide compensation, even where an accident occurs that results in damage to
property. Note also that, the customer is liable for the cost of repairs to disassembled products, even
where that unit is still under warranty.
1