Operation; Tips On Saving Energy; Residual Heat Use; Energy Save Mode - Miele H6160B Operating And Installation Instructions

Operation

Tips on saving energy

– Remove any accessories from the
oven that you do not require for
cooking.
– Pre-heat the oven only if instructed to
do so in the recipe or the cooking
chart.
– Avoid opening the door during
cooking.
– In general, if a range of temperatures
is given, it is best to select the lower
temperature and to check the food
after the shortest given time.
– Use Fan plus U as you can cook at
temperatures 10–30 °C lower than
when using other functions.
– Fan grill \ can be used for a wide
variety of food. With Fan grill you can
use lower temperatures than with
other grill functions which use the
maximum temperature setting.
– The factory default setting "P i – S 0"
for the time of day display gives the
lowest possible energy consumption.
– With the factory default setting "P 7 –
S 0" the oven interior lighting
switches off automatically after
15 seconds. It can be switched on
again at any time by touching
48

Residual heat use

When cooking using temperatures
above 140 °C and cooking durations
longer than 30 minutes you can turn the
temperature selector down to ß about
5 minutes before the end of cooking.
The heating elements will switch off and
the residual heat in the oven will be
sufficient to finish cooking the food.

Energy save mode

To save energy the oven switches itself
off if no action is taken within a certain
time after switching it on, or after the
end of a cooking programme.
The duration will depend on the
settings used (function, temperature,
duration).
The time of day will show or the display
will remain dark (see "Settings - Time -
Display")
.