Table of Contents
Advertisement
I Digital Video Encoder Devices
Digital video encoder devices refer to MPEG2 video encoder devices (WJ-GXE900). They connect to the CPU through an
Ethernet switching hub in an IP based network. Refer to the Operating Instructions of MPEG2 encoder/MPEG2 decoder.
G Connect with CPU
The video encoders connect with the CPU through its Ethernet port and one or more switching hub units. The system can sup-
port up to 256 video encoder devices.
TRIGGER OUT
ALARM IN
RESET
ON OFF
100BASE-TX
TERM
RS-485
4 3 2 1 G 4 3 2 1 GGV + – G
4
3
2
1
VIDEO IN
WJ-GXE900
G Setup from Admin Console
In order to be added to the GX System, an encoder device must be entered into the digital device database. In the admin con-
sole, select Switch Nodes from the Domain menu, select Digital (GX) from the sub-menu that appears, and then enter the infor-
mation for the encoder device. Please note, you need to know the Rotary Switch (SW1 A, B, C) readings from the encoder
device. Rotary Switch settings must be unique for all the encoder and decoder devices. Refer to the Admin Console User's
Guide.
30
POWER
ON
OFF
VIDEO OUT
AUDIO IN
SIGNAL
GND
192.168.200.200
Switching HUB
10BASE-T/100BASE-TX
SYSTEM
SYSTEM
CONTROLLER
DEVICE
SERIAL
OTHER
2
1
POWER
ON
SIGNAL GND
OFF
AC IN
WJ-MPU955A
Advertisement
Table of Contents
