Advertisement
Drive Connectors: Hitachi GD-7000 8X DVD-ROM User's Guide
Jumpers: Hitachi GD-7000 8X DVD-ROM User's Guide
PINS
1-2
3-4
5-6
None
SETTING
Master (Factory setting)
Slave
Cable Select
Slave
DESCRIPTION
The drive is set to Master when the
jumpers are positioned on the two pins
closest to the IDE cable.
The drive is set to slave when the
jumpers are positioned on the middle two
pins. This allows the drive to be on the
same cable as the hard drive. This may
cause a negative effect on the speed of
your hard drive.
Please contact the manufacturer of your
computer for information on this setting.
The drive is set to slave when no jumper
is installed. This allows the drive to be on
the same cable as the hard drive. This
may cause a negative effect on the
speed of your hard drive.
Advertisement
