Computer Input
Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2(RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
then press the SELECT button.
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.45).
28
COMPUTER 2 button
Computer 2(RGB)
buttons to select Input and
or the SELECT button.
buttons to select Computer 2 and
: RGB)
RGB)
Top Control
INPUT button
Input Menu
Computer 1(RGB) /
(Component) / (Scart)
Computer 2(RGB)
Video
S-video