D-Link AirPlus G DWL-G510 Manual page 15

Configuration Utility (continued)
Configuration
SSID: The Service Set Identifier is the name assigned to the wireless network. The
factory SSID setting is set to default. Make changes here to match the SSID on
existing Wireless Router or Access Point.
Wireless Mode:
Infrastructure
the default setting.)
Ad-Hoc - Wireless mode used when connecting directly to a computer equipped
with a wireless adapter in a Peer-to-Peer environment.
Data Encryption:
and WPA/WPA2 when encryption is enabled.
Authentication: Allows you to specify the authentication mode for the network. The
default setting is set to Open Authentication.
Key Length: When encryption is enabled, you will have the option to specify the level
and key format of the encryption used. Select the appropriate Key Index: 1-4 and enter
ASCII or hexadecimal digits in the appropriate field.
IEEE 802.1x: When encryption is enabled, you will have the option to specify if you wish
to use 802.1x authentication.
Click Apply to save the changes.
Click on the pull-down menu; select from the following options:
- Connecting to the WLAN using an access point. (This is
The default setting is set to Disabled. The adapter supports WEP
15