Dell Latitude E7240 Owner's Manual page 39

Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Parallel Port
Serial Port
SATA Operation
Drives
Description
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE: This option is enabled by
default.
• Enable UEFI Network Stack: This allows
you to enable UEFI Networking Protocols
in pre-OS and early OS networking
environment.
Allows you to define and set how the parallel
port on the docking station operates. You can
set the parallel port to:
• Disabled
• AT
• PS2
• ECP (Latitude 7440)
Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the setting is
disabled.
Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• AHCI
• RAID On (Default Setting)
NOTE: SATA is configured to support
RAID mode.
Allows you to configure the SATA drives on
board. The options are:
• SATA-0
• SATA-1
39