Brother CE-5500PRW Service Manual page 142

Adjustment
4. Test modes (used for adjustments)
No. Mode
Switches base line with each
stitch.
3 Point *Switches left base line/center
02
Needle Drop
base line/right base line with
pressing
When each switch was turned ON/OFF, the number displayed on the
right side of LCD changes.
Switch
04 (Presser switch, BH lever switch, BH switch, Bobbin winder switch)
Monitor
* In case of models equipped with the buzzer, One beep sounds when
each switch was turned ON/OFF.
Forward and
100 stitches forward on the left base line.
05 Reverse
100 stitches reverse on the right base line.
Feed
Feed Dog
07 Stops center base line.
Position
Starting test mode/Starting and stopping operation
Z (zigzag) F (feed)
operations operations
0mm
(none)
.
Switches
0mm/5mm
with pressing
Operating speed
Any speed may be
selected using the
speed control lever.
Switches low/middle/
high speed with
pressing .
Any speed may be
selected using the
speed control lever.
.
Ref.
Used adjustment
page
Left base line
4 - 7
needle drop
Rotary hook unit
4 - 8
position
Needle clearance
4 - 9
left/right
Needle bar rising 4 - 10
Needle bar height 4 - 11
Clearance
between needle
4 - 12
and rotary hook
point
BH lever switch
4 - 17
position
Feed forward/
4 - 15
backward
Front/back and
left/right position of 4 - 19
feed dog
4 - 3