Operation; Operation Of Tuner; Station Selection; Programming - Bosch PLN-DVDT Installation And User Instructions Manual

Plena DVD Player-Tuner | Installation and User Instructions | Operation
5

Operation

5. 1

Operation of tuner

5.1.1

Station selection

• Use the tuner FM/AM selection key (13) to choose
between FM and AM reception.
• Use the tuner frequency up/down keys (12) to select
the required frequency (press once to fine tune; press
and hold to search for channels).
5.1.2

Programming

• Save the selected radio station as a preset by pressing
the tuner memory key (15).
• Press the tuner preset memory keys M1/6 to M5/0
(10) for memory positions 1 to 5.
Or
• Press the tuner memory key (15), the tuner shift key
(16) and the tuner preset memory keys M1/6 to
M5/0 (10) for memory positions 6 to 10.
• The tuner display (11) shows 'MEMORY' during this
process. Both for AM and FM, 10 presets are
available.
Saved presets are selected by pressing the tuner
memory keys M1/6 to M5/0 (10) or by pressing the
tuner shift key (16) followed by M1/6 to M5/0. For easy
selection, pressing the tuner scan key (14) monitors the
presets by selecting all 10 presets sequentially for 5
seconds.
1 2 3 4 5
Plena DVD Player-Tuner
Mode
Eject
figure 5. 1 : Front panel of Plena DVD Player-Tuner
Bosch Security Systems | 2008-09 | 9922 141 50772 en
6 7 8 9
Note
The FM tuner mutes the noise between radio
stations. This means that the output is muted
when the tuner is not tuned to a radio station.
To turn this feature off, press and hold the tuner
frequency up/down keys (12) and the tuner shift
key during power up.
To turn this feature on again, repeat this
procedure.
10 11 12
M1/6 M2/7 M3/8 M4/9 M5/0
en | 19
AM/FM
13
Scan
14
Shift Memory
15
16