To Attach Stand Mixer Attachment; Before Attaching Stand Mixer Attachment - KitchenAid 5FGA Instructions And Recipes Manual

To Attach Stand Mixer Attachment

before Attaching Stand Mixer
Attachment
1. Turn Stand Mixer speed control to
"0" (OFF).
2. Unplug mixer or disconnect power.
3. Depending on which type of hub you
have, either flip-up the hinged cover
or loosen the attachment knob (A) by
turning it counterclockwise and remove
attachment hub cover.
4. Insert the attachment shaft housing (B)
into the attachment hub (C) making
certain that attachment power shaft
fits into square hub socket.
5. It may be necessary to rotate the
attachment back and forth. When the
attachment is in proper position, the
pin on the attachment housing will fit
into the notch on the hub rim.
6. Tighten the attachment knob by turning
it clockwise until the attachment is
completely secured to mixer.
2
C
b
A