D-Link GO-DSL-N150 User Manual page 6

LEDs Color
WLAN Green
WPS Green
Rear Panel
The following table describes the interfaces of the device:
Items
Power
WLAN
WPS
Reset
LAN4/3/2/1
DSL
Status
Off The LAN connection of the device is failed.
On The
connection.
Blinks Data is being transmitted on WLAN.
Off The WLAN connection is failed.
Off WPS is disabled.
Blinks WPS is enabled, and is waiting for client to
negotiate.
Power switch for powering on/off the device.
Power interface for connecting to the power adapter.
Press the button gently and let go after 2 seconds to enable
WLAN function.
Press the button and let go after 1 second to enable WPS
function.
Reset to the factory defaults. To reset to the factory
defaults, keep the device powered on and push a paper clip
in to the hole for over 3 seconds. Then release it, the
configuration is reset to the factory defaults.
RJ-45 interface for connecting to the Ethernet interface of
PC or other Ethernet devices through the Ethernet cable.
RJ-11 interface for connecting to the ADSL interface or a
splitter through the telephone cable.
GO-DSL-N150
Description
device has
Description
3
User Manual
successful WLAN