UPC E0 Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it. Default = On.
* On
UPC E0 Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC E data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
EAN/JAN 13
3800g/3800gHD/3800gPDF User's Guide
<Default All EAN/JAN Settings>
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
7 - 21