Functions After A Call - Siemens Gigaset A580IP Manual

You have the following options:
u
Toggling:
¤
Use q to swap between the participants.
– End call with active participant:
Press the end call key a, to end the current call. The participant who was
previously waiting will automatically call you back.
u
Conference call:
– End call with both participants: press the end call key a.
Accepting a waiting call
Precondition: Call waiting is activated (
¢
§Menu§
Accept Call Waiting
You have the option of toggling or holding a conference call.
Please note
u
Without CLIP, a waiting call is only announced with a signal tone.
u
If the first call was an internal call, the internal connection is ended.
u
An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
u
When an SMS is received, this is only signalled by a call waiting tone (without
screen display).

Functions after a call

Cancelling ringback
¢
§Menu§
Select Services
Cancel Ringback
Select and press
If you have cancelled the ringback, a code is sent.
¤
After confirmation from the telephone network, press the end call key a.
¢
§Menu§
£
Page
¢
Fixed line
§OK§
.
Network services
End Active Call.
56).
57