Advertisement
AL-1250
[7]
SIMULATION TROUBLE CODE
1. Contents of simulations
Main code
Sub code
2
2
3
4
5
6
7
26
2
3
SPF sensor status display
(Operation/Procedure)
ON/OFF of the SPF sensor is displayed with the lamps on the operation panel.
Sensor name
Document set sensor (SPID)
SPF document transport sensor (SPPD)
SPF cover sensor (SCOD)
SPF open/close sensor (SDSW)
SPF motor operation check
(Operation/Procedure)
When the start key is pressed, the SPF motor rotates for 10 sec at the speed corresponding to
the currently set magnification ratio.
SPF paper feed solenoid (SPUS) operation check
(Operation/Procedure)
When the start key is pressed, the SPF paper feed solenoid repeats ON (500 ms) and OFF (500
ms) 20 times.
RSPF pressure release solenoid (SPFS) operation check
(Operation/Procedure)
When the start key is pressed, the RSPF document transport solenoid (SPFS) repeats ON (500
ms) and OFF (500 ms) 20 times.
RSPF resist clutch (SRRC) operation check
(Operation/Procedure)
When the start key is pressed, the RSPF resist clutch (SRRC) repeats ON (500 ms) and OFF
(500 ms) 20 times.
RSPF gate solenoid (SGS) operation check
(Operation/Procedure)
When the start key is pressed, the RSPF gate solenoid (SGS) repeats ON (500 ms) and OFF
(500 ms) 20 times.
SPF setting
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of SPF is displayed.
2. Enter the code number and press the start key. The setting is changed.
Code number
0
1
2
Second cassette setting
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the second cassette is
displayed.
2. Enter the code number and press the start key. The setting is changed.
Code number
0
1
Contents
Developer cartridge replacement lamp
Photoconductor cartridge replacement lamp
SPF
Without SPF
With SPF
With RSPF
Second cassette
Without second cassette
With second cassette
7-1
Display lamp
Jam lamp
SPF jam lamp
Advertisement
