Sharp AM-900 Service Manual page 42

AM-900U
5.2. Soft switch function description
SW1 No. 1 ~ No. 4 Recall interval
Choice is made for a recall interval for speed and rapid dial numbers.
Use a binary number to program this. If set to 0 accidentally, 1 will be
assumed.
SW1 No. 5 ~ No. 8 Recall times
Choice is made as to how many recall times should be made. Use a
binary number to program this.
SW2 No. 1 ~ No. 4 Memory retransmission times
The number of memory retransmissions is set.
SW2 No. 5 ~ No. 8 Memory retransmission interval
The interval between memory retransmissions is set.
SW3 No. 1 ~ No. 4 Number of rings for auto-receive
(0: No ring receive)
When the machine is set in the auto receive mode, the number of rings
before answering can be selected. It may be set from one to nine rings
using a binary number. If the soft switch was set to 1, a direct connec-
tion is made to the facsimile. If it was set to 0 accidentally, receive ring
is set to 1. If it was above 9, receive rings are set to 9.
SW3 No.5, No.6 COPY/FAX/SCAN mode
An operation mode for each copy, fax, or PC scan is set.
SW-3 No. 7 Receive mode
Auto/extension telephone receiving mode is set.
SW-3 No. 8 Reserved
Set to "0".
SW-4 No. 1 ~ No. 4 Distinctive ringing
When the ringing setting is turned off, all of the CI signal are received.
When any of the standard, and ring patterns 1 through 3 is selected for
the ringing setting, only the selected CI signal is received.
CI signal patterns
The CI signal patterns consists of the standard pattern, and ring pat-
terns 1 through 7. The standard pattern is the conventional one.
SW4 No. 5 Time display format
When this switch is set to "0", time is displayed in 12-hour system.
When set to "1", 24-hour system.
SW4 No. 6 Date display format
Used to select date display/print formats.
0: DAY-Month-Year
1: Month-Day-Year
SW4 No. 7 Summer time (Daylight saving)
The daylight saving function ON/OFF is set.
SW4 No. 8 Flatbed document size of TX mode
Used to set a document scan length for fax transmission from the flat-
bed.
SW5 No. 1, No. 2 Alarm volume
Used to set volume of the end buzzer or error buzzer for facsimile
transmission/reception.
SW5 No. 3, No. 4 Ringer volume
Ringer volume:
The calling sound volume of CI signal receiving is set.
SW5 No. 5 Dial mode
Switch the type according to the telephone circuit connected to the
facsimile.
0: PULSE DIAL
1: TONE DIAL
SW5 No. 6 Header registration
When setting this switch to "1", registering senders is protected.
SW5 No. 7, No. 8 Auto Clear
Used to set the retention time for the copy settings. After the specified
auto clear time elapses, the default settings return.
SW6 No. 1 ~ No. 3 Communication results printout
It is possible to obtain communication results after each transaction.
Normally, the switch is set (No. 1: 0, No. 2: 0, No. 3: 1) so that the
communication result is produced only a communication error is
encountered.
If No. 1 was set to 1, No. 2 was set to 1 and No. 3 was set to 0, the
communication result will be produced every time a communication is
done, even if the communication was successful. If No. 1 was set to 0,
No. 2 to 1 and No. 3 to 0, the communication result will be produced
every transmission. Setting No. 1 to 1 No. 2 to 0 and No. 3 to 0 will dis-
able this function. No transaction report will be printed. If No. 1 was set
to 0, No. 2 to 0 and No. 3 to 0, the communication result is produced
only after a timer and memory transmission or when a communication
error is encountered.
SW6 No. 4 Automatic printing of activity report
This soft switch is used to select; whether or not to produce the activity
report when the memory is full (about 30 items). An activity report can
be produced from Report&List mode.
After producing the activity report, all the data in the memory will be
cleared. When the switch function is set to "0" (NO), the data in mem-
ory will be deleted from the oldest as it reaches the maximum memory
capacity (approx. 30 items).
SW6 No. 5 Print out total time and total number of pages on activ-
ity report
Used to print out the total communication time and the total pages
sent/received on the activity report.
SW6 No. 6, No. 7 Fax default resolution
Used to set the transmission mode which is automatically selected
when the QUALITY key is not pressed. In the copy mode, however,
the fine mode is automatically selected unless the QUALITY key is
manually set to another mode.
SW6 No. 8 Reserved
Set to "0".
SW7 No. 1 ECM mode
Used to determine ECM mode function.
SW7 No. 2 Reserved
Set to "0".
SW7 No. 3 Header print
When it is set at 0, sender's name, sending page number and so on
are automatically printed in the recording paper on the receiving side
during transmission. Thus, the sender can be known on the receiving
side.
0: Applied.
1: Not applied.
2 – 26