Using Electronic Pen With "Easy Whiteboard - Panasonic TH-50PB2E Operating Instructions Manual

Using Electronic pen with "Easy WhiteBoard

The "Easy WhiteBoard" software preinstalled in the display allows you to use the electronic pen without connecting
the display to a computer.
Preparation
1. Connect the PEN ADAPTER port on the rear (the side with the "TO DISPLAY" indication) of the charger to
the PEN ADAPTER port of the display, and the MEMORY port on the rear of the charger to the MEMORY/
(CHARGE) port of the display with the included cables
PEN
ADAPTER
External input
ports on the rear
of the display
2. Connect the electronic pen adapter to the PEN ADAPTER port on the front of the charger, and the
recording medium compatible with USB2.0 to the MEMORY port on the front of the charger
Electronic pen adapter
Recording medium compatible with
USB2.0
Note
• Connect a recording medium when saving the drawn characters and other objects. (See 17 page)
3. Register the electronic pen to the electronic pen adapter
See 19 page
4. Make the display settings to use the electronic pen
Make the setting of "Touch-Pen Settings" in the "Setup" menu of the display and select the input
See Display Operations of the operating instructions
5. Touch the display screen with the electronic pen
• The main menu of Easy WhiteBoard is displayed.
• The WHITEBOARD input does not require this operation.
Notice
• When connecting the electronic pen adapter, recording medium and cables, make sure of the direction of their
terminals and insert or remove them straight.
Notes
• With Easy WhiteBoard, more than one electronic pen cannot be used simultaneously.
• Once the electronic pen is registered, reregistration is not necessary as long as it is not unregistered.
14
Cable
Short
MEMORY
CHARGE
/(CHARGE)
Short
Long
Long
Cable