Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Huawei Wireless Router
Summary of Contents for Huawei Wireless Router
- Page 1 Quick Start...
- Page 2 Thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.
-
Page 3: Getting To Know Your Device
Getting to Know Your Device Note: Pictures are for reference only. Please examine the actual device to determine where features are located. On/Off key LAN1 indicator Wi-Fi/WPS key LAN2 indicator Wi-Fi indicator External antenna port Network status indicator Telephone port Power indicator Power port WPS indicator... -
Page 4: Pc Configuration Requirements
Indicator Status Off: Wi-Fi not activated Steady on: Wi-Fi activated Wi-Fi indicator Off: Searching for network Yellow, steady on: Registered to network Network status Green, steady on: Dial-up access successful indicator Steady on: Power connected Power indicator Off: WPS not activated Blinking: WPS activated WPS indicator Steady on: WPS successfully connected... -
Page 5: Setting Up Your Device
Web browser: Microsoft Internet Explorer 6 or higher, Firefox 1.5 or higher, or Safari 3.0. Setting Up Your Device Step 1: Install the SIM card. Remove the card cover. Slide the SIM card into the card slot with the gold contact facing downward. Replace the card cover. Caution: Before inserting or removing the SIM card, disconnect the device from the power adapter. - Page 6 Step 3: Use an Ethernet cable to connect the device to a PC. If the indicator light for the LAN port to which the Ethernet cable is connected is on, the connection is active. The network cable connecting to the PC must not be longer than 100 meters (328 feet). Step 4: (Optional) Connect a fixed-phone to the device.
- Page 7 Insert the latches on the table stand into the slots on the back of the device. The table stand allows the device to stand on a flat surface like a table or desk. See the following figures. Note: The table stand is optional. If a table stand was not included with your device, you may purchase a compatible table stand from your wireless service provider.
- Page 8 antenna. If you do not need the external antenna, skip this step. Powering Your Device On/Off Press and hold the Power key to power the device on or off. Making a Call (Optional) Pick up the handset. When you hear a dial tone, you may make a call. Setting Up the Wireless Connection (Take a computer with Windows XP operating system as an example)
- Page 9 Note: Press and hold to deactivate Wi-Fi or WPS. Release when is off. Set up the Wi-Fi connection. Ensure that is steady on. Choose Start > Control Panel > Network Connections > Wireless Network Connection. Note: Before setting up a Wi-Fi connection, be sure that the PC has a wireless network adapter installed.
-
Page 10: Logging In To The Management Page
Set up a WPS connection. If the Wi-Fi device to which your device connects supports WPS, a password is generated automatically; there is no need to enter it. To set up a WPS connection, do as follows: Start your device. Start the Wi-Fi device to which your device connects. -
Page 11: Restoring Factory Defaults
Mode Operation regardless of whether or not data is transferred. After logging in to the management page, you can Manual follow prompts to connect to or disconnect from the Internet. After being powered on, the device connects to the Internet automatically when data is transferred. The Demand device will disconnect from the Internet when there is no data being transferred. - Page 12 Friendly Tips If you are unable to use the device normally, do as follows: See Help on the management page. Restart the device. Restore the device to factory defaults. Contact your wireless service provider. Version: V100R001_01 Part Number: 31010CWR...