Related Manuals for LG 47WV50BR
Summary of Contents for LG 47WV50BR
- Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating your set and retain it for future reference. MONITOR SIGNAGE MODELS 47WV50BR 47WV50MS 47WV50BS www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS - Customizing Sound Options LICENSES Using Additional Options - Adjusting Aspect Ratio ASSEMBLING AND - Using the Input List PREPARING ENTERTAINMENT Accessories Parts - Connecting to a Wired Network To Install in a Portrait Layout - Network Status Remove L-brackets before Installation - Connecting USB Storage Devices... -
Page 3: Table Of Contents
TABLE OF CONTENTS Daisy Chain Monitors - RGB Cable - DVI Cable TROUBLESHOOTING SPECIFICATIONS IR CODES CONTROLLING THE MULTIPLE PRODUCT Connecting the cable RS-232C Configurations Communication Parameter Command Reference List Transmission / Receiving Protocol NOTE Product damage from moving or changing the installation location is not covered by warranty. The warranty will not cover any damages caused by using the product in an excessively dusty environment. -
Page 4: Licenses
LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 5: Assembling And Preparing
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. -
Page 6: Parts
ASSEMBLING AND PREPARING Parts < 47WV50BR / 47WV50MS > AUDIO DVI IN DVI OUT COMPOSITE SPEAKER /COMPONENT OUT /DVI /COMPONENT IN REMOTE CONTROL IN Connection panel < 47WV50BS > AUDIO DVI IN DVI OUT SPEAKER /COMPONENT OUT /DVI /COMPONENT IN... -
Page 7: To Install In A Portrait Layout
ASSEMBLING AND PREPARING To Install in a Portrait Layout When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove L-brackets before Installation Remove the L-brackets from each corner of the monitor before installing it. NOTE Keep the removed L-brackets and use them when moving the monitor later. -
Page 8: Storage Method For Panel Protection
ASSEMBLING AND PREPARING STORAGE METHOD FOR PANEL PROTECTION Correct Method Incorrect Method Panel Panel If the product needs to be set upright, hold both sides of the product, and tilt backward carefully If the product is tilted onto the bezel, the bottom of for. -
Page 9: Installing On A Wall
ASSEMBLING AND PREPARING Installing on a Wall CAUTION Disconnect the power cord first, and then To install the Monitor on a wall (optional), move or install the monitor set. Otherwise use the VESA screws provided as accessories to electric shock may occur. fasten it. - Page 10 ASSEMBLING AND PREPARING Securing the product to a wall (optional) WARNING (Depending on model) If a product is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: »...
-
Page 11: External Equipment Setup
ASSEMBLING AND PREPARING EXTERNAL EQUIPMENT SETUP IR RECEIVER This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. AUDIO REMOTE CONTROL IN... -
Page 12: Tiling Displays
ASSEMBLING AND PREPARING Tiling Displays How to Mount the Set Example of 2 x 2 Tiling Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall. Screws for attaching the VESA wall mount <Rear view of the set with the wall mount plate>... -
Page 13: How To Join Sets
ASSEMBLING AND PREPARING How to Join Sets Join other sets using screws for fixing the VESA wall mount in the same way as above. Set 4 joined to the rest of the sets (2 x 2 tiling) After joining the sets, use the tiling guide to adjust the gap between the sets. Now the 2 x 2 tiling is complete. -
Page 14: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover. - Page 15 REMOTE CONTROL AUTO ⓘ INFO Automatically adjusts picture Displays the input position and minimizes image information. instability.(RGB input only) SETTINGS W.BAL Accesses the main menus Enters the White Balance or saves your input and exit menu. menus. S.MENU (SuperSign Menu Key) This button does not apply to Selects menus or options and this model.
-
Page 16: Displaying The Device Name Connected To An Input Port
REMOTE CONTROL Displaying the Device Name Connected to an Input Port Display which devices are connected to which NOTE external input ports. External inputs supported: HDMI, DVI-D, Access the Input list screen and press the blue Display Port Labels available: PC, DTV (input label) button on the remote control. -
Page 17: Using The Monitor Set
USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC RGB Connection Transmits the analog video signal from your PC to Your Monitor set supports the Plug & Play* feature. the monitor set. Connect the PC and the Monitor set with the 15-pin signal cable as shown the * Plug &... -
Page 18: Dvi Connection
USING THE MONITOR SET DVI Connection HDMI Connection Transmits digital video signal from your PC to Transmits digital video and audio signals from your the monitor set. Connect the PC and the monitor PC to the monitor set. Connect the PC and the set with the DVI cable as shown the following monitor set with the HDMI cable as shown in the illustrations. -
Page 19: Display Port Connection
USING THE MONITOR SET Display Port Connection IR Receiver Connection Transmits digital video and audio signals from Allows the use of IR receiver extension. your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations. -
Page 20: Adjusting The Screen
USING THE MONITOR SET Adjusting the Screen Customizing Image Options Customize basic and advanced options of each Selecting an Image Mode image mode for the best screen performance. Display images in its optimized settings by Press SETTINGS to access the main menus. selecting one of the preset image modes. -
Page 21: Customizing Pc Display Options
USING THE MONITOR SET Adjusting the Sound Customizing PC Display Options Customize options of each image mode for the Selecting an Sound Mode best image quality. Play the sound in its optimized settings by This function works in the following mode: selecting one of the preset sound modes. -
Page 22: Customizing Sound Options
If the aspect ratio is set to 4:3 for a long Option Description period of time, image burn may occur on the Infinite LG's Infinity Sound option provides 5.1 letterboxed area of the screen. Sound channel stereo sound quality from two speakers. - Page 23 USING THE MONITOR SET 16:9 : This selection will allow you to adjust the : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs).
-
Page 24: Using The Input List
USING THE MONITOR SET Using the Input List Selecting an Input Source Press INPUT to access the input source list. Press the navigation buttons to scroll to one of the input sources and press OK. Input source Description Watch video from a VCR or other external devices. -
Page 25: Entertainment
ENTERTAINMENT ENTERTAINMENT Connecting to a Wired Network To set up the network settings: (Even if your dis- play has already connected automatically, running setup again will not harm anything), Connect the display to a local area network (LAN) via the LAN port as shown on the following illustra- Press SETTINGS to access the main menus. -
Page 26: Network Status
Press the navigation buttons to scroll to ble terms of service. For details, contact your NETWORK and press OK. ISP. LG is not responsible for any malfunction of the Press the navigation buttons to select display and/or the Internet connection feature Network Status. -
Page 27: Connecting Usb Storage Devices
ENTERTAINMENT Connecting USB Storage Devices Tips for Using USB Storage Devices Only a USB storage device is recognizable. Connect USB storage devices such as a USB If the USB storage device is connected flash memory, external hard drive to the display and use multimedia features (See "Browsing files"... -
Page 28: Browsing Files
ENTERTAINMENT Be sure to back up important files since data Browsing Files stored in a USB memory device may be Access the photo, music, or movie lists and browse damaged. We will not be responsible for any files. data loss. Connect a USB storage device. -
Page 29: Supported File Format
ENTERTAINMENT Supported File Format Type Supported file format Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV) Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX 3.11, DivX4, DivX5. DivX6 Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263 Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA Bit rate... -
Page 30: Viewing Movies
ENTERTAINMENT Viewing Movies Play a movie. Play video files on display. Your display shows all NOTE of the video files saved in a USB storage device or shared folder on a PC. Non-supported files are displayed the preview image by icon only Abnormal files are displayed in the form of Press the navigation buttons to scroll to bitmap... - Page 31 ENTERTAINMENT Tips for Using Playing Video Files Video Options Some user-created subtitles may not work Press SETTINGS to access the Pop-Up properly. menus. Some special characters are not supported Press the navigation buttons to scroll to Set in subtitles. Video Play., Set Video. or Set Audio. and HTML tags are not supported in subtitles.
- Page 32 ENTERTAINMENT When you select the Set Video Play, Code Page Support Language Latin1 English, Spanish, French, Press the navigation buttons to scroll to show German, Italian, Portuguese, the Picture Size, Audio Language, Subtitle Danish, Romanian, Norwegian, Language, or Repeat. Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Press the navigation buttons to scroll to make Latin2...
-
Page 33: Viewing Photos
ENTERTAINMENT When you select the Set Video, Page 1/1 Photo List USB1 USB Drive Drive1 Page 1/1 Press the navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio, Move View Page Change Change Numbers Exit To Music List Mark Mode Press the navigation buttons to scroll to show... - Page 34 ENTERTAINMENT Using Photo Options ENERGY Press the ENERGY SAVING button SAVING repeatedly to change the brightness of Use the following options while viewing photos. your screen. Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). TransitionEffect: Set the view mode of the slideshow.
- Page 35 ENTERTAINMENT When you select the Set Photo View, Press the navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. Press the navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide.
-
Page 36: Listening To Music
ENTERTAINMENT Listening to Music When you select the Video, Press the navigation buttons to scroll to make appropriate adjustments. Press the navigation buttons to scroll to My Me- and press OK. Press the navigation buttons to scroll to Music List and press OK. - Page 37 ENTERTAINMENT Tips for playing music files Control playback by using the following buttons. This unit cannot support the ID3 Tag embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 NOTE 004. - B04.mp3 005. - B05.mp3 006.
-
Page 38: Viewing The Contents List
ENTERTAINMENT Viewing the Contents List Music Options Press SETTINGS to access the Pop-Up men- Plays back the stored files using the Export option in SuperSign Manager. Press the navigation buttons to scroll to Set Au- Press the Navigation buttons to scroll to dio Play or Set Audio and press OK. -
Page 39: Divx® Vod Guide
ENTERTAINMENT DivX® VOD Guide DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 Press SETTINGS to access the main menus. -
Page 40: Using Pip/Pbp
ENTERTAINMENT Using PIP/PBP Select the PIP or PBP icon from the play list. Displays videos or photos stored on a USB device on a single monitor by dividing it into the main and sub screens. Press the SETTINGS button to move to OPTION and press OK. -
Page 41: Customizing Settings
CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing the Main Menus Press SETTINGS to access the main menus. Press the navigation buttons to scroll to one of the following menus and press OK. Press the navigation buttons to scroll to the setting or option you want and press OK. -
Page 42: Picture Settings
CUSTOMIZING SETTINGS PICTURE Settings PICTURE Move • Aspect Ratio : 16:9 ꔋ Press SETTINGS to access the main menus. • Energy Saving : Off • Easy Brightness Control : Off Press the navigation buttons to scroll to PICTURE • Smart Energy Saving : Off press OK. - Page 43 CUSTOMIZING SETTINGS Setting Description TruMotion Corrects images to display smoother motion sequences. TruMotion • Low : De-Judder / De-Blur value is set to 3. ◄ ► • High : De-Judder / De-Blur value is set to 7. • De-Judder • User : De-Judder / De-Blur can be set manually. •...
- Page 44 CUSTOMIZING SETTINGS Advanced Control Setting Description Dynamic Adjusts the contrast to keep it at the best level according to the brightness of the screen. The Contrast picture is improved by making bright parts brighter and dark parts darker. (This function can be used (Off/High/ only under component.) Medium/Low)
-
Page 45: Audio Settings
Option Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. -
Page 46: Time Settings
CUSTOMIZING SETTINGS TIME Settings TIME Move • Clock ꔋ Press SETTINGS to access the main menus. • Off Time : Off • On Time : Off Press the navigation buttons to scroll to TIME and press OK. • Sleep Timer : Off •... -
Page 47: Option Settings
CUSTOMIZING SETTINGS OPTION Settings OPTION Move • Language ꔋ Press SETTINGS to access the main menus. • ISM Method : Normal • DPM Select : On Press the navigation buttons to scroll to OPTION and press • Fail Over : Off •... - Page 48 CUSTOMIZING SETTINGS Setting Description Factory Reset Select this option to return to the default factory settings. Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 255) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program.
- Page 49 CUSTOMIZING SETTINGS Setting Description Setting (Only for Mode This option indicates the monitor's internal temperature and controls the 47WV50MS fan. model) • Auto: Switches the fan on and off according to the set temperature. • On: The fan is always switched on. •...
- Page 50 CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. When using 9 monitors When using 2 monitors When using 4 monitors When the Tile Mode option is disabled ID 2 ID 3 ID 2 ID 2 ID 1...
- Page 51 CUSTOMIZING SETTINGS PIP/PBP NOTE Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub The subscreen is only supported when using screens. the USB device. Mode *PIP (Picture In Picture): Displays the sub screen Component in the main screen.
-
Page 52: Picture Id
CUSTOMIZING SETTINGS Picture ID Picture ID is used to change the settings of a If you press the left/right buttons or press the specific display using a single IR receiver for ON button repeatedly, the Picture ID cycles multi-vision. The set receiving the IR signal through OFF and 1 to 4. -
Page 53: Network Settings
CUSTOMIZING SETTINGS NETWORK Settings NETWORK Move • Player Name Setting ꔋ Press SETTINGS to access the main menus. • Network Setting : None • Network Status : Not connected Press the navigation buttons to scroll to NETWORK • Server IP Setting press OK. -
Page 54: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the monitor set’s back panel. Find an external device you want to connect to your monitor set shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. -
Page 55: Connecting To A Hd Receiver, Dvd, Camcorder, Camera, Gaming Device, Or Vcr Player
MAKING CONNECTIONS Connecting to a HD Receiver, HDMI Connection DVD, Camcorder, Camera, Transmits the digital video and audio signals from Gaming Device, or VCR Player an external device to the monitor set. Connect the external device and the monitor set with the HDMI Connect a HD receiver, DVD, or VCR player to the cable as shown on the following illustration. -
Page 56: Component Connection
MAKING CONNECTIONS Component Connection AV(CVBS) Connection Transmits the analog video and audio signals from Transmits the analog video and audio signals from an external device to the monitor set. Connect an external device to the monitor set. Connect the external device and the monitor set with the the external device and the monitor set with RGB-Component cable as shown in the following the composite cable as shown in the following... -
Page 57: Connecting To The Lan
MAKING CONNECTIONS Connecting to the LAN Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player, or LAN Connection a USB memory card reader to the monitor set and access the USB menu to use various multimedia files. -
Page 58: Daisy Chain Monitors
MAKING CONNECTIONS Daisy Chain Monitors Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box. • To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products. -
Page 59: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord y See if the power cord is properly connected to the outlet. connected? Power is on, but the screen y Adjust brightness and contrast again. appears extremely dark. y Backlight may need repair. - Page 60 TROUBLESHOOTING The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu.
- Page 61 TROUBLESHOOTING Screen color is abnormal. Problem Resolution Screen has poor color resolution y Set the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or y Check the connection status of the signal cable.
-
Page 62: Specifications
Composite(AV), RS-232C, LAN, USB Power Rated Voltage AC 100-240 V~, 50 / 60 Hz 1.5 A Power Consumption 47WV50BR On Mode : 150 W Typ. 190 W Max 47WV50BS Smart Energy Saving Mode : 80 W Typ. Off Mode : ≤ 0.5 W Sleep Mode : ≤... - Page 63 SPECIFICATIONS * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
- Page 64 SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI/DVI Horizontal Vertical Resolution Component Resolution (DTV) Frequency(kHz) Frequency(Hz) 31.469 59.94 480i 640 x 480 576i 37.5 640 x 480 480p 720 x 400 31.468 70.8 576p 37.879 60.317 800 x 600 720p 46.875 800 x 600 1080i...
-
Page 65: Ir Codes
IR CODES IR CODES All models do not support the HDMI/USB function. Some key codes are not supported depending on the model. Code (Hexa) Function Note R/C BUTTON Power INPUT R/C BUTTON MONITOR ON R/C BUTTON MONITOR OFF R/C BUTTON ENERGY SAVING ( R/C BUTTON R/C BUTTON... -
Page 66: Controlling The Multiple Product
CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at one time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. -
Page 67: Command Reference List
CONTROLLING THE MULTIPLE PRODUCT Command Reference List COMMAND DATA (Hexadecimal) 01. Power 00 to 01 02. Input Select Refer to ‘Input Select.’ 03. Aspect Ratio Refer to ‘Aspect Ratio.’ 04. Energy Saving Refer to ‘Energy Saving.’ 05. Picture mode Refer to ‘Picture mode.’ 06. - Page 68 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 39. Tile Mode 00 to 01 40. Tile Mode Check 41. Tile ID Refer to ‘Tile ID.’ 42. Tile H Position 00 to 32 43. Tile V Position 00 to 32 44. Tile H Size 00 to 32 45.
-
Page 69: Transmission / Receiving Protocol
CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. - Page 70 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Energy Saving (Command: j q) To control the Power On/Off the display. To set the Energy Saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 00: Off 01 : On 01: Minimum...
- Page 71 CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) 10. Tint (Command: k j) To adjust the screen brightness. To adjust the screen tint. * This function is available only in AV/Component Transmission input. [k][h][ ][Set ID][ ][Data][Cr] Transmission Data 00 to 64: Brightness 0 to 100 [k][j][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00 to 64: Tint R50 to G50...
- Page 72 CONTROLLING THE MULTIPLE PRODUCT 13. V Position (Command: f r) 16. Balance (Command: k t) To adjust the screen Vertical Position. To adjust the sound balance. * This function is available only when the Tile Mode is Transmission set to Off. [k][t][ ][Set ID][ ][Data][Cr] * The operational range varies depending on the Data 00 to 64: Left 50 to Right 50...
- Page 73 CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) 22. Volume Control (Command: k f) To adjust the Bass values. To set the playback volume. Transmission Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100 Acknowledgement Acknowledgement...
- Page 74 CONTROLLING THE MULTIPLE PRODUCT 25. Off Timer(Repeat Mode/ Time) (Command: f e) 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the Off Timer(Repeat Mode/ Time) function. To set the On Timer(Repeat mode/ Time) function. Transmission Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 Data1...
- Page 75 CONTROLLING THE MULTIPLE PRODUCT 27. On Timer Input (Command: f u) 28. Sleep Time (Command: f f) To select an external input for the current On Time To set the Sleep Time. setting and add a new schedule or change the Transmission existing schedule.
- Page 76 CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) 34. Power Indicator (Power Light) (Command: f p) To set the Auto Off function. To set the Power Indicator (Power Light) function. Transmission Transmission [f][g][ ][Set ID][ ][Data][Cr] [f][p][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 15 minutes) Data 00: Off 01: 15 min.(Off after 15 minutes)
- Page 77 CONTROLLING THE MULTIPLE PRODUCT 37. Fail Over Input Select (Command: m j) 40. Tile Mode Check (Command: d z) To select the input source for auto switch. To check Tile Mode status. * This command is only available when the fail over Transmission (auto) mode is set to Custom.
- Page 78 CONTROLLING THE MULTIPLE PRODUCT 43. Tile V Position (Command: d f) 46. Natural Mode (In Tile Mode) (Command : d j) To adjust the Tile Vertical position. To display the image naturally, the part of the image * This function is available only when the Natural that would normally be displayed in the gap between option of the Tile Mode is set to Off while the Tile the monitors is omitted.
- Page 79 CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) 52. Key (Command: m c) To check the fan errors. To send a key code of the IR remote control. Transmission Transmission [d][w][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr] Data FF: Read the status Data IR_KEY_CODE Acknowledgement...
- Page 80 CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) 58. White Balance Green Gain (Command: j n) To check the Serial Numbers. To set the White Balance Green Gain. Transmission Transmission [f][y][ ][Set ID][ ][Data][Cr] [j][n][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Data 00 to FE: Green Gain 0 to 254 Acknowledgement...
- Page 81 CONTROLLING THE MULTIPLE PRODUCT 61. PC Power Control (Command: d t) 64. Easy Brightness Control Schedule (Command: s To control the PC power if the PC and the monitor are synchronized. Sets the Easy Brightness Control Schedule. Transmission Transmission [d][t][ ][Set ID][ ][Data][Cr] [s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1...
- Page 82 CONTROLLING THE MULTIPLE PRODUCT 65. Reading luminance values (Command: m u) 66. Status check (Command: s v) Reads luminance values. Check various statuses. Transmission Transmission [m][u][ ][Set ID][ ][FF][Cr] [s][v][ ][Set ID][ ][Data][ ][FF][Cr] Data 05: Check the normal operation of No.1 and Acknowledgement No.2 luminance sensors.
- Page 83 CONTROLLING THE MULTIPLE PRODUCT 67. BLU Maintenance (Command: m t) Select ON/OFF of BLU Maintenance. Transmission [m][t][ ][Set ID][ ][Data][Cr] Data 00: BLU Maintenance OFF 01: BLU Maintenance ON ** It may not be supported, depending on the model. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 68.
- Page 84 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.