Sharp CD-SW330 Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Stereo System
  5. CD-SW330
  6. Service manual

Sharp CD-SW330 Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

XM is the registered trademark of XM
PRECAUTIONS FOR USING LEAD FREE SOLDER
[1]
[2]
[3]
Specifications ......................................... . ....... 1-2
[4]
Names Of Parts ..................................... . ....... 1-3
[1]
Mechanism Section ............................... . ....... 2-1
[2]
Test Mode .............................................. . ....... 2-2
[3]
CD Section............................................. . ....... 2-4
[4]
CD Changer Mechanism Section........... . ....... 2-5
[1]
Caution On Disassembly ....................... . ....... 3-1
[2]
[1]
Main Block Diagrams ............................. . ....... 4-1
[2]
CD Block Diagrams ...................................... 4-3
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
SERVICE MANUAL
®
Satellite Radio Inc.
CONTENTS
No. S3715CDSW330/
MINI COMPONENT SYSTEM
CD-SW330
MODEL
CD-SW330 Mini Component System consisting of
CD-SW330 (main unit) and CP-S330 (front speaker)
and CP-SW330 (subwoofer).
In the interests of user-safety the set should be restored to its
original condition and only parts identical to those specified be
used.
CHAPTER 5. CIRCUIT DESCRIPTION
[1]
Waveforms Of Servo Circuit .......................... 5-1
[2]
IC Voltage...................................................... 5-2
LAYOUT
[1]
Notes On Schematic Diagram....................... 6-1
[2]
Types Of Transistor And LED........................ 6-1
[3]
Schematic Diagram ....................................... 6-2
[4]
Wiring Side Of PWB .................................... 6-20
[1]
Troubleshooting............................................. 7-1
[1]
Function Table Of IC...................................... 8-1
[2]
FL Display ..................................................... 8-8
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
CD-SW330

Advertisement

Table of Contents
loading

Related Manuals for Sharp CD-SW330

Summary of Contents for Sharp CD-SW330

  • Page 1: Table Of Contents

    CD-SW330 MODEL CD-SW330 Mini Component System consisting of CD-SW330 (main unit) and CP-S330 (front speaker) and CP-SW330 (subwoofer). In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified be used.
  • Page 2 CD-SW330 Audio XL-MP150 Service Manual XLMP150 Market PRECAUTIONS FOR USING LEAD-FREE SOLDER 1. Employing lead-free solder "MAIN, POWER, DISPLAY, GAME INPUT, CD MP3, FRONT SPEAKER LED, XM READY, CD CHANGER MOTOR (PWB ONLY), SUB WOOFER LED " of this model employs lead-free solder.

  • Page 3: Chapter 1. General Description

    CD-SW330 CHAPTER 1: GENERAL DESCRIPTION [1] Important Service Safety Precaution CAUTION : “These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so”.

  • Page 4: Specifications

    FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL. Tuner As part of our policy of continuous improvement, SHARP reserves the right to make design and specifcation changes for product Frequency range FM: 87.5 - 108.0 MHz improvement without prior notice.The performance specifcation...

  • Page 5: Names Of Parts

    CD-SW330 [4] Names Of Parts CD-SW330 Front panel 1. Disc Trays 2. Timer Indicator 3. Tuner (Band) Button 4. CD Button 5. Power On/Stand-by Button 6. Tape (1 2) Button 7. Game/Video Button 8. Tape 1 Cassette Compartment 9. Headphone Jack 10.

  • Page 6: Remote Control

    CD-SW330 CD-SW330 Remote control 1. Remote Control Transmitter 2. Disc Number Select Buttons 3. Clock/Timer Button 4. Character Input/Disc Direct Search Buttons 5. Equalizer Mode Select Button 6. Extra Bass (Surround)/Demo Button 7. Volume Up and Down Buttons 8. Power On/Stand-by Button 9.

  • Page 7: Chapter 2. Adjustments

    CD-SW330 CHAPTER 2. ADJUSTMENTS CD-ES700/CD-ES77 CD-ES700/CD-ES77 Service Manual CD-ES700/CD-ES77 Market [1] Mechanism Section • Driving Force Check Torque Meter Specified Value Play: TW-2111 Tape 1: Over 80 g Tape 2: Over 80 g • Torque Check Torque Meter Specified Value...

  • Page 8: Test Mode

    CD-SW330 [2] Test Mode • Setting the test mode During stand-by mode, press GAME/VIDEO button while pressing down the button and button. then, press the CD button to enter the test mode. IL isn’t done T E S T OPEN/CLOSE operation is using manual.
  • Page 9 CD-SW330 <<MEMORY>> key input. Laser ON. <<MEMORY>> key input. Tracking OFF play at that specific point. <<MEMORY>> key input. Tracking ON play from that specific point. <<MEMORY>> key input. Adjustment result automatically will display as below for each 2 sec : a) "FOF_XXXX"...

  • Page 10: Cd Section

    CD-SW330 [3] CD Section CD Error code description Error Explanation CAM error. Can't detect CAM switch when CAM is moving. When it detect cam operation error during initialize process. TRAY error. Can't detect TRAY switch when TRAY is moving. When it detect TRAY operation error during initialize process.

  • Page 11: Cd Changer Mechanism Section

    CD-SW330 [4] CD Changer Mechanism Section • All numbers in the drawing correspond to those in parts guide (CHANGER MECHANISM PARTS). HALF GEAR MUST BE ARRANGED AS SHOWN 2 – 5...
  • Page 12 CD-SW330 APPLY SANKOL SHS1001 BEFORE FIX FIX ITEM 139 ACCORDING TO THE PICTURE AS SHOWN ABOVE ROTATE MODE BIG GEAR UNTIL REACH AS SHOWN IN PICTURE 2 – 6...
  • Page 13 CD-SW330 APPLY GREASE SC141 PULL THE LEVER UNITIL REACH THE ARROW MARK 2 – 7...
  • Page 14 CD-SW330 FIGURE 2 FIGURE 1 APPLY GREASE SC141 SLOT CLAMP SWITCH ARM INSIDE BASE SLOT HALF GEAR MUST BE ARRANGED AS SHOWN 2 – 8...
  • Page 15 CD-SW330 APPLY GREASE SC141 AT BOTTOM SIDE OF GEAR FOLLOW MARKING (REFER TO GRAY AREA) NO NEED TO APPLY GREASE AT BOTTOM SIDE APPLY GREASE SC141 AT TOP SIDE OF GEAR FOLLOW MARKING (REFER TO GRAY AREA) IF DIRECTION IS OTHER THAN DIRECTION...
  • Page 16 CD-SW330 APPLY GREASE SC141 AT HALF GEAR AREA ROTATE CLOCKWISE UNTIL REACH HERE (MAXIMUM) 2 – 10...
  • Page 17 CD-SW330 2 – 11...
  • Page 18 CD-SW330 THE SHOWN AREA MUST FREE FROM GREASE CORRECT GREASE SC141 APPLICATION LENGTH GREASE APPLICATION PORTION INCORRECT SHOWN HOLE MUST FACING ARROW DIRECTION 2 – 12...
  • Page 19 CD-SW330 APPLY GREASE SC141 AT BOTTOM SIDE ONLY TR-RE JOINT GEAR C APPLY GREASE SC141 ONLY AT TOP SIDE GEAR MUST BE FIXED ACCORDINGLY TO THE HOLE'S 2 – 13...
  • Page 20 CD-SW330 2 – 14...
  • Page 21 CD-SW330 APPLY GREASE SC141 WHEN FIXING ITEM 144 MUST FOLLOW AS SHOWN 2 – 15...
  • Page 22 CD-SW330 FIGURE 1 FIGURE 2 APPLY GREASE SC141 APPLY GREASE SC141 FIGURE 3 2 – 16...
  • Page 23 CD-SW330 ITEM 133 , 134 MUST APPLY GREASE SC141 ON TOP SIDE GEAR ONLY GEAR 112 GEAR 112 CORRECT INCORRECT TOP VIEW AFTER IT IS INCORRECT TO BEING ASSEMBLED FIX IT IN REVERSED DIRECTION 2 – 17...
  • Page 24 CD-SW330 APPLY GREASE SC141 BEFORE FIX MOVE 112 UNTIL TOUCH THE WALL DURING GEAR A ROTATE MUST PRESS SHOWN AREA AND LEVER B WILL MOVE ARROW DIRECTION THEN FIX PART 108 SCREW TORQUE +0.5 kgf-cm 803 x6 APPLY GREASE SC141...
  • Page 25 CD-SW330 APPLY GREASE SC141 BEHIND THE LEVER NEED TO APPLY GREASE SC141 PULL IT THEN LEVER WILL MOVE IN 2 – 19...
  • Page 26 CD-SW330 APPLY GREASE SC141 APPLY GREASE SC141 BEFORE FIX APPLY GREASE SC141 AT BOSS SPRING MUST BE ARRANGED UNDER THE HOOK CORRECT LR JOINT LEV BOARD R LR JOINT LEV BOARD R INCORRECT 2 – 20...
  • Page 27 CD-SW330 IT IS INCORRECT IF ASSEMBLED IN A REVERSED DIRECTION APPLY GREASE SC141 BIG SLOT MUST FACING OUT WHEN FIX AND AFTER FIXED TO BASE CHASSIS. AFTER ASSEMBLY, CONFIRM WITH FREE DROP TEST GEAR POSITION DURING FIXING 2 – 21...
  • Page 28 CD-SW330 IT IS INCORRECT IF ASSEMBLED IN A REVERSED DIRECTION APPLY GREASE SC141 BIG SLOT MUST FACING OUT WHEN FIX AND AFTER FIXED TO BASE CHASSIS AFTER ASSEMBLY, CONFIRM WITH FREE DROP TEST GEAR POSITION DURING FIXING CONFIRM BOTH GEARS SIT PROPERLY AND LOCKED...
  • Page 29 CD-SW330 AFTER FIX OUTER UP/DOWN LEVER HOLD AS SHOWN PORTION AND MOVE UP/DOWN THEN CONFIRM WHETHER LEVER GO INSIDE THE HOLE OR NOT IT IS CORRECT IF THE LEVER HOLD ENTERS THE HOLE BIGGER SLOT FACING OUT IT IS INCORRECT IF THE LEVER HOLD DOES NOT...
  • Page 30 CD-SW330 BIG SLOT FACING OUT 2 – 24...
  • Page 31 CD-SW330 PUSH THE LEVER ACCORDING TO ARROW DIRECTION THEN FIX WHEN FIXING MAIN BASE ASSEMBLY FOLLOW ACCORDING TO PICTURE 1 PICTURE 3 PICTURE 1 PICTURE 2 CORRECT INCORRECT INCORRECT MAKE SURE MECHA HOLDER SHAFT FIX PROPERLY TO LEVER 2 – 25...
  • Page 32 CD-SW330 APPLY SANKOL (SHS1001) APPLY SANKOL (SHS1001) ON TOP APPLY SANKOL (SHS1001) INSIDE THE SLOT & OTHER SHOWN PORTION APPLY SANKOL (SHS1001) APPLY SANKOL (SHS1001) AT BACK PORTION COSMO GUIDE TRAY HAVE FIX TRAY NO 1 FIRST THAN MARKING AS SHOWN...
  • Page 33 CD-SW330 GEAR UP/DOWN BOARD APPLY GREASE SC141 AT INNER & OUTER GEAR SLIDING PORTION WHEN FIX GEAR UP/ DOWN BOARD THE TWO LEVER MUST AT PARALLEL LINE AND POSITIONED AT TOP MAX SIDE AFTER ASSEMBLY GEAR UP/DOWN BOARD 2 – 27...
  • Page 34 CD-SW330 SCREW TORQUE +0.5 kgf-cm ROTATE THE GEAR TO MOVE UP 111 GEAR UP AND DOWN BOARD BEFORE SCREW 2 – 28...
  • Page 35 CD-SW330 AFTER ASSEMBLY TOP PLATE FIX THE FFC FFC4 AFTER PUSH, MAKE SURE SNAP PROPERLY PRESS IN BACK PORTION AFTER FIX, PUSH FOLLOW ARROW DIRECTION SLOT IN BEFORE LOCK AFTER LOCK BEFORE LOCK MUST CONFIRM AFTER LOCK BEFORE LOCK AFTER LOCK MUST CONFIRM 2 –...
  • Page 36 CD-SW330 CAUTION CORRECT 1. MAKE SURE NO PWB CHIP INSIDE SET .( BEFORE FIX MAKE SURE PWB IS FREE FROM DUST , GREASE & ETC ) INCORRECT 2 – 30...
  • Page 37 CD-SW330 THE TWO SLOT MUST FREE FROM GREASE SC141 ASSEMBLY SEQUENCE APPLY GREASE SC141 BELOW THE MARKING 1. APPLY GREASE SC141 TO MAIN BASE FOR BOTH PORTION GREASE SC141 APPLICATION AREA ALL BOSS APPLY GREASE SC141 APPLY GREASE SC141 AT 3 HALF MOON...
  • Page 38 CD-SW330 REFERENCE ONLY MOTOR GEAR HEIGHT FROM MAIN BASE 12.2 MOTOR SCREWING HOLE SCREW TORQUE + 0.5 MUST HAVE GAP M1,2 AFTER SCREW MOTOR, CONFIRM THE ARRANGEMENT AS IN FIGURE 2 FIGURE 2 APPLY GREASE SC141 2 – 32...
  • Page 39 CD-SW330 3.1 + 0.1 SHAFT X 3 DIM AFTER INSERTION APPLY SANKOL (SHS1001) MUST CONFIRM EVERYDAY SANKOL (SHS1001) APPLICATION AREA 109-2 APPLY GREASE AT THE SLIDING PORTION APPLY GREASE SC141 UP / DOWN HOLDER CHANGE TO NATURE COLOR 2 – 33...
  • Page 40 CD-SW330 BEFORE MELT IT AFTER MELT IT ( MUST FLAT ) WHEN FITTING STABILIZER PLATE TO STABILIZER, ROTATE STABILIZER ANTI CLOCKWISE BY JIG STRICTLY CANNOT FIT USING HAND) AFTER ASSEMBLED TO HOLDER, STABILIZER ( BY HAND CANNOT X ) NEED TO BE CLEANED...
  • Page 41 CD-SW330 APPLY GREASE SC141 MUST MAKE SURE SNAP PROPERLY BOTH SIDE ALL SURFACE MUST TOUCH INCORRECT CORRECT INCORRECT 2 – 35...
  • Page 42 CD-SW330 NO GAP HAVE GAP CORRECT INCORRECT 2 – 36...

  • Page 43: Chapter 3. Mechanism Blocks

    CD-SW330 CHAPTER 3. MECHANISM BLOCKS CD-ES700/CD-ES77 CD-ES700/CD-ES77 Service Manual CD-ES700/CD-ES77 Market [1] Caution On Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take cassette tape and compact disc out of the unit.
  • Page 44 CD-SW330 (N1) x 2 O 3x10mm (N2)x1 (N3)x1 (H1) x 2 (N2)x1 O 3x10mm Bracket, XM PWB Changer Mechanism Unit Rear Panel XM PWB CD servo PWB (H1) x 2 O 3x10mm Figure 4 Figure 7 (J2)x1 (P1)x4 O 3x10mm...
  • Page 45 CD-SW330 CP-S330 CP-SW330 STEP REMOVAL PROCEDURE FIGURE STEP REMOVAL PROCEDURE FIGURE LED PWB 1. Front Panel………….…..(A1) X 1 LED PWB 1. Front Panel………….…..(A1) X 1 2. Socket…….…………..…(A2) X 1 2. Socket…….…………..…(A2) X 1 3. Screw…….…….…….….(A3) X 2 3. Screw…….…….…….….(A3) X 2 Woofer 1.

  • Page 46: Removing And Reinstalling The Main Parts

    CD-SW330 [2] Removing And Reinstalling The Main Parts 1. TAPE MECHANISM SECTION Perform steps 1 to 5 and 9 of the disassembly method to remove the tape mechanism. 1.1. How to remove the record/playback and erase heads (TAPE 2) (See Fig. 1) 1.
  • Page 47 CD-SW330 2. CHANGER MECHANISM SECTION Perform steps 1, 2, 3, 13, 14, and 15 of the disassem- Reduction gear D bly method to remove the CD changer mechanism. 2.1. How to remove CD Disc (See Fig. 1~4) 1. When CD is at play position (Figure1), rotate reduc-...

  • Page 48: Chapter 4. Diagrams

    CD-SW330 CHAPTER 4. DIAGRAMS [1] Main Block Diagrams Figure 4-1: MAIN BLOCK DIAGRAM (1/2) 4 – 1...
  • Page 49 CD-SW330 Figure 4-2: MAIN BLOCK DIAGRAM (2/2) 4 – 2...

  • Page 50: Cd Block Diagrams

    CD-SW330 [2] CD Block Diagrams Figure 4-3: CD BLOCK DIAGRAM (1/2) 4 – 3...
  • Page 51 CD-SW330 Figure 4-4: CD BLOCK DIAGRAM (2/2) 4 – 4...

  • Page 52: Waveforms Of Servo Circuit

    CD-SW330 CHAPTER 5. CIRCUIT DESCRIPTION [1] Waveforms Of Servo Circuit TMAX LPFO LRCKI BCKI 5 – 1...

  • Page 53: Ic Voltage

    CD-SW330 [2] IC Voltage IC702 IC901 VOLTAGE VOLTAGE VOLTAGE VOLTAGE VOLTAGE VOLTAGE ( V ) ( V ) ( V ) ( V ) ( V ) ( V ) 3.02 3.12 -26.50 -26.42 0.00 49.81 3.02 2.90 -26.57 -29.86 0.00...
  • Page 54 CD-SW330 VOLTAGE VOLTAGE VOLTAGE VOLTAGE 0.02 0.01 1.53 3.26 1.63 1.52 0.03 1.63 0.76 3.03 3.27 0.98 1.52 0.03 0.02 0.70 0.59 1.52 0.03 1.74 0.01 3.27 1.63 0.70 1.63 3.27 1.53 1.63 3.27 0.03 3.27 1.68 1.63 4.53 0.04 1.63...

  • Page 55: Chapter 6. Circuit Schematics And Parts

    CD-SW330 CHAPTER 6. CIRCUIT SCHEMATICS AND PARTS LAYOUT [1] Notes On Schematic Diagram • Resistor: • The indicated voltage in each section is the one mea- To differentiate the units of resistors, such symbol as K sured by Digital Multimeter between such a section and M are used: the symbol K means 1000 ohm and and the chassis with no signal given.

  • Page 56: Schematic Diagram

    CD-SW330 [3] Schematic Diagram Figure 6-1: MAIN SCHEMATIC DIAGRAM (1/2) 6 – 2...
  • Page 57 CD-SW330 FROM POWER PWB-A2 Figure 6-2: MAIN SCHEMATIC DIAGRAM (2/2) 6 – 3...
  • Page 58 CD-SW330 Figure 6-3: POWER SCHEMATIC DIAGRAM (1/6) 6 – 4...
  • Page 59 CD-SW330 Figure 6-4: POWER SCHEMATIC DIAGRAM (2/6) 6 – 5...
  • Page 60 CD-SW330 Figure 6-5: POWER SCHEMATIC DIAGRAM (3/6) 6 – 6...
  • Page 61 CD-SW330 Figure 6-6: POWER SCHEMATIC DIAGRAM (4/6) 6 – 7...
  • Page 62 CD-SW330 Figure 6-7: POWER SCHEMATIC DIAGRAM (5/6) 6 – 8...
  • Page 63 CD-SW330 Figure 6-8: POWER SCHEMATIC DIAGRAM (6/6) 6 – 9...
  • Page 64 CD-SW330 GAME INPUT PWB-B2 Figure 6-9: DISPLAY SCHEMATIC DIAGRAM (1/6) 6 – 10...
  • Page 65 CD-SW330 Figure 6-10: DISPLAY SCHEMATIC DIAGRAM (2/6) 6 – 11...
  • Page 66 CD-SW330 Figure 6-11: DISPLAY SCHEMATIC DIAGRAM (3/6) 6 – 12...
  • Page 67 CD-SW330 Figure 6-12: DISPLAY SCHEMATIC DIAGRAM (4/6) 6 – 13...
  • Page 68 CD-SW330 Figure 6-13: DISPLAY SCHEMATIC DIAGRAM (5/6) 6 – 14...
  • Page 69 CD-SW330 Figure 6-14: DISPLAY SCHEMATIC DIAGRAM (6/6) 6 – 15...
  • Page 70 CD-SW330 CD CHANGER MOTOR PWB Figure 6-15: CD MP3 SCHEMATIC DIAGRAM (1/2) 6 – 16...
  • Page 71 CD-SW330 TC94A70FG-002 FROM MAIN PWB-A1 FROM DISPLAY PWB-B1 Figure 6-16: CD MP3 SCHEMATIC DIAGRAM (2/2) 6 – 17...
  • Page 72 CD-SW330 MSS8550H Figure 6-17: XM READY SCHEMATIC DIAGRAM (1/2) 6 – 18...
  • Page 73 CD-SW330 Figure 6-18: XM READY SCHEMATIC DIAGRAM (2/2) 6 – 19...

  • Page 74: Wiring Side Of Pwb

    CD-SW330 [4] Wiring Side Of PWB MAIN PWB-A1 DISPLAY PWB-B1 CNP701A FFC701 C112 C141 C111 C118 R139 CNP101 R138 C113 C150 R642 C117 C126 Q103 C132 Q101 C133 Q102 C134 Q104 C131 RP91 R995 C139 IC905 Q111 R998 L103 C982...
  • Page 75 CD-SW330 TUNER PACK (TP1) MAIN PWB-A1 CNP303 XM READY PWB-E CNP501 PWB-B1 CD MP3 PWB-C TUNER PACK CNP5 FFC303 CNS601 CNP702B 8 10 1214 1618 7 9 1113 15 17 SUB WOOFER CNP303 LIGHT-UP 9 11 C640 BI601 D603 L-CH...
  • Page 76 CD-SW330 MAIN PWB-A1 R148 JP502 R146 R620 R661 C654 C610 C682 Q616 R622 C681 C655 JP503 R660 R665 R621 R625 R627 R615 R616 R663 C637 C638 C656 R623 R614 R667 R651 R648 D613 R649 C657 R632 D611 Q613 R662 R658...
  • Page 77 CD-SW330 JP110 JP107 C101 C102 C120 R122 R160 R124 C106 R109 R161 R109 R107 R115 Q108 R110 C105 R101 R117 R148 R123 R115 C107 R146 C128 R150 C110 C119 R118 R130 R120 C118 C115 R129 R128 R126 C124 R134 C130...
  • Page 78 CD-SW330 POWER PWB-A2 AC POWER SUPPLY CORD AC 120V, 60Hz COLOR TABLE WHITE BLUE BLACK YELLOW GREEN CNS701 CNS801 Lead-free solder indication FROM MAIN PWB-A1 FROM Lead-free solder is used in the POWER PWB. DISPLAY PWB-B1 Refer to "Precautions for handling lead-free solder"...
  • Page 79 CD-SW330 -MEMO- 6 – 25...
  • Page 80 CD-SW330 DISPLAY PWB-B1 FROM MAIN PWB-A1 CNP701B FFC701 CNP701A C744 RP749 C736 LED701 R746 R734 R733 R732 R731 R722 R783 R784 C703 R785 XL701 R786 R787 R788 R712 SW702 RX701 R794 R791 R705 SW701 R790 C715 R789 6 8 10...
  • Page 81 CD-SW330 SW711 RD09 SW716 SW712 SW715 RD11 SW713 SW714 C720 IC705 D713 C721 D705 D714 RP744 C742 D706 BI701 RP791 VR701 C726 FL701 RP731 Q710 RP733 RP721 Q712 RP734 SW706 SW707 RP718 RP732 Q711 RP715 RP720 SW709 SW708 3 5 7...
  • Page 82 CD-SW330 DISPLAY PWB-B1 RD13 RP764 C718 C711 RP745 RP746 RP747 CP740 RP748 C725 C729 C727 C739 C723 JP701 D707 RP722 D722 Q714 Q706 D721 RP724 Q713 C734 C732 C731 RD07 Figure 6-26: WIRING SIDE OF DISPLAY PWB (BOTTOM VIEW) (1/2)
  • Page 83 CD-SW330 JP707 JP708 JP705 JP703 JP704 R753 R754 R741 R739 Q703 R727 C729 R728 C727 R725 RP742 R721 R723 IC703 R719 R713 R718 C705 C745 RP757 R708 Q702 Q701 R704 RP753 R707 R703 R795 RD02 RP768 C717 R764 RP752 C713...
  • Page 84 CD-SW330 GAME INPUT PWB-B2 JK692 HEADPHONES L690 JK690 VIDEO IN R693 R-CH R691 AUX/VIDEO C694 R690 L-CH R692 LUG 3 LUG TERMINAL COLOR TABLE GRAY Lead-free solder indication WHITE BLACK Lead-free solder is used in the GAME INPUT PWB. Refer to "Precautions for handling lead-free solder" for instructions PINK and precautions.
  • Page 85 CD-SW330 GAME INPUT PWB-B2 C755 C754 Lead-free solder indication Lead-free solder is used in the GAME INPUT PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions. Figure 6-29: WIRING SIDE OF GAME INPUT PWB (BOTTOM VIEW) 6 – 31...
  • Page 86 CD-SW330 FROM DISPLAY PWB-B CNP705 CD MP3 PWB-C FFC705 CD CHANGER MOTOR PWB-F COLOR TABLE WHITE BLACK GREEN BLUE Figure 6-30: WIRING SIDE OF CD MP3 PWB (TOP VIEW) (1/2) 6 – 32...
  • Page 87 CD-SW330 FROM MAIN PWB-A1 FROM FROM PLAY PWB-B1 BI601 DISPLAY PWB-B1 CNP705 CNP702 FFC702 CNP5 CNP3 CNP6 WIRE_B’ WIRE_B 12 14 16 11 13 15 CNP1 FFC1 Lead-free solder indication Lead-free solder is used in the CD MP3, CD CHANGER MOTOR PWB.
  • Page 88 CD-SW330 CD MP3 PWB-C RA16 RA15 Lead-free solder indication Lead-free solder is used in the CD MP3 PWB. Refer to "Precautions for handling lead-free solder" for instructions and precautions. Figure 6-32 WIRING SIDE OF CD MP3 PWB (BOTTOM VIEW) (1/2)
  • Page 89 CD-SW330 Figure 6-33: WIRING SIDE OF CD MP3 PWB (BOTTOM VIEW) (2/2) 6 – 35...
  • Page 90 CD-SW330 XM READY PWB-E FROM MAIN PWB-A1 CNP702B FFC702 TPM506 RC505 TPA516 TPM518 CC505 CX516 TPM512 IC503 R503 C504 CC512 QX503 RU505 CD528 CX503 R505 RU535 C528 CC510 RD506 RD507 TPM515 RD509 C533 IC501 RU509 CD513 RX510 RD529 C510 CC511...
  • Page 91 CD-SW330 TAPE MECHANISM TO DISPLAY PWB-B1 ASSEMBLY CNP704 TAPE MECHANISM PWB-G FFC704 Lead-free solder is used in this PWB. Refer to "Precautions for handling lead-free SOLENOID solder" for instructions and precautions. SOLENOID TAPE MOTOR TAPE 2 TAPE 1 RECORD/PLAYBACK PLAYBACK HEAD...

  • Page 92: Chapter 7. Flowchart

    CD-SW330 CHAPTER 7. FLOWCHART [1] Troubleshooting 1. When the CD does not function The CD section may not operate when the objective lens of the optical pickup is dirty. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken, check the following items.
  • Page 93 CD-SW330 (1) Focus-RF system check. Although a CD is inserted and the cover is closed, "NO DISC" is displayed. 1. Does the pickup move? Sled motor (M2A). 2. Does the focus (lens) move up and down ? Check the focus peripheral circuit.
  • Page 94 CD-SW330 (2) Tracking system check. Check the TE waveform at pin 6 on IC1. If the waveform shown in Figure 4 appears and soon after NO The tracking servo is not activated. DISC appears ? Check the peripheral circuits at pins 6, 7, 10, 98 and 100 on IC1, pins 17, 18, 35 and 36 on IC2 and FFC1.
  • Page 95 CD-SW330 (4) PLL system check. When a disc is loaded, start play operation. TMAX LPFO The RF waveform is normal, but the TOC data cannot be read. Check the TMAX waveform. (Figure 6) Figure 6 Check around Pins 72, 73, 74, 75, 76 and 78 on IC1.

  • Page 96: Chapter 8. Others

    CD-SW330 CHAPTER 8. OTHERS [1] Function Table Of IC IC1 VHiLC78690E-1: CD Servo (LC78690E) (1/2) Pin No. Terminal Name Input/Output Setting in Reset Function EFMIN Input INPUT RF signal input pin. RFOUT Output UNSTABLE RF signal output pin. Output UNSTABLE RF signal DC level detection.
  • Page 97 CD-SW330 IC1 VHiLC78690E-1: CD Servo (LC78690E) (2/2) Pin No. Terminal Name Input/Output Setting in Reset Function CONT1 Input/Output INPUT General Purpose I/O pin 1 Controlled by command from the microproces- sor. Any of these that are unused must be CONT0...
  • Page 98 CD-SW330 IC1 VHiLC78690E-1: CD Servo (LC78690E) 80 79 78 77 76 75 74 73 72 69 68 67 66 62 61 EFMIN LRSY DATACK RFOUT DATA TEST1 PHLPF STDATA STCK STREQ TEST0 LC78690E CONT0 RFMON CONT1 VREF CONT2 JITTC INTB1...
  • Page 99 CD-SW330 IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261) Pin No. Terminal Name Function VO3+ BTL Output pin (+) for channel 3. VO3- BTL Output pin (-) for channel 3. VO2+ BTL Output pin (+) for channel 2. VO2- BTL Output pin (-) for channel 2.
  • Page 100 CD-SW330 IC2 VHILA6261//-1: Focus/Tracking/Spin/Sled Driver (LA6261) VOLTAGE CONTROL AMP DUFFER AMP DUFFER AMP For VREF For 1/2 VCC Reference voltage Band gad Figure 8-2: BLOCK DIAGRAM OF IC 8 – 5...
  • Page 101 CD-SW330 IC601 VHiLC75341/-1: Audio Processor (LC75341) Pin No. Terminal Name Function 13-16 R1-4 Input signal pin. Pin No. Terminal Name Function RSEL0 Input selector output pin. Serial data and clock input pin for Volume + equalizer output pin control. RTRE Treble band filter comprising capaci- Chip enable pin.
  • Page 102 CD-SW330 IC851 VHIAN80T53/-1: Multi Regulator (AN80T53) Terminal Name Function REG4 Output 5.1 V power supply with a minimum peak out current of 1200 mA. REG3 Output 13 V power supply with a minimum peak out current of 1350 mA. Connected to Power supplies.

  • Page 103: Fl Display

    CD-SW330 [2] FL Display FL701 VVKNA12MM59-1 GRID ASSIGNMENT MP3 WMA TOTAL col2 Dot2 col1 Dot1 2G 3G 4G 5G 6G 7G h j k (1G) (2G~11G) ANODE CONNECTION FOLD CHAN CHAN TITLE-1 TITLE-2 TOTAL TITLE-3 PTYI SLEEP DAILY MEMORY X-BASS...
  • Page 104 CD-SW330 -MEMO- 8 – 9...

  • Page 105: Parts Guide

    CD-SW330 PARTS GUIDE MINI COMPONENT SYSTEM CD-SW330 MODEL CD-SW330 Mini Component System consisting of CD-SW330 (main unit) and CP-S330 (front speaker) and CP-SW330 (subwoofer). CONTENTS [1] INTEGRATED CIRCUITS [10] CHANGER MECHANISM / CD MECHANISM PARTS [2] TRANSISTORS [11] CABINET PARTS...
  • Page 106 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [1] INTEGRATED CIRCUITS VHITC94A70FG2 CD MP3 Decoder VHILA6261//-1 Focus/Tracking/Spin/Sled Driver,LA6261 IC101 VHIAN7345K/-1 Playback and Record/Playback Amp.,AN7345K IC501 VHIXMDTREV4A1 XM Ready IC502 VHIAZ4558CME1 Operation Amplifier IC503 VHIAK4384//-1 24 BIT 2-CH DAC ( Use in XM Ready PWB-E )
  • Page 107 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [2] TRANSISTORS Q910 VSKTC3203Y/-1 Silicon,NPN,KTC3203 Y Q914 VSKTC3875GR-1 Silicon,NPN,KTC3875 GR Q915 VSKTA1504GR-1 Silicon,PNP,KTA1504 GR Q916 VSKRC104S//-1 Digital,NPN,KRC104 S QX503 VSKRC107S//-1 Digital,NPN,KRC107 S QX504 VSMMSS8550H-1 Silicon,MSS8550H [3] DIODES VHDKDS184//-1 Silicon,KDS184 D501 VHDHSS4148+-1...
  • Page 108 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [5] COILS L701 VP-DH220K0000 22µ H,Peaking L702 VP-DH220K0000 22µ H,Peaking L703 VP-DH470K0000 47µ H,Peaking 3 μ H,Choke L901 RCILZ0024AWZZ 3 μ H,Choke L902 RCILZ0024AWZZ 3 μ H,Choke L903 RCILZ0024AWZZ 3 μ H,Choke...
  • Page 109 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [7] CAPACITORS C107 VCKYCY1HB331K 330 pF,50V C108 VCKYCY1HB331K 330 pF,50V C109 VCKYCY1HB331K 330 pF,50V C110 VCKYCY1HB331K 330 pF,50V 47 μ F,25V,Electrolytic C111 VCEAZA1EW476M 47 μ F,25V,Electrolytic C112 VCEAZA1EW476M C113 VCQYKA1HM393K 0.039 µF,50V,Mylar...
  • Page 110 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [7] CAPACITORS C642 VCEAZA1HW105M 1 µF,50V,Electrolytic C643 VCEAZA1HW105M 1 µF,50V,Electrolytic C644 VCEAZA1HW225M 2.2 µF,50V,Electrolytic C645 VCEAZA1HW225M 2.2 µF,50V,Electrolytic C646 VCKYCY1HB102K 1000 pF,50V C647 VCKYCY1HB102K 1000 pF,50V C648 VCEAZA1HW105M 1 µF,50V,Electrolytic C649 VCEAZA1HW105M 1 µF,50V,Electrolytic...
  • Page 111 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [7] CAPACITORS C861 VCQYKA1HM223K 0.022 µF,50V,Mylar 33 μ F,50V,Electrolytic C901 VCEAZA1HW336M 1 μ F,50V,Electrolytic C902 VCEAZA1HW105M 33 μ F,50V,Electrolytic C903 VCEAZA1HW336M 0.1 μ F,50V,Thin Film C904 VCFYFA1HA104J C905 VCEAZA1HW475M 4.7 µF,50V,Electrolytic...
  • Page 112 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [7] CAPACITORS CX525 VCKYCY1HB104K 0.1 µF,50V [8] RESISTORS C681 VRS-CY1JB000J 0 ohms,Jumper,0.8x1.55mm C682 VRS-CY1JB000J 0 ohms,Jumper,0.8x1.55mm FB501 VRS-TV2AB000J 0 ohms,Jumper,1.25x2mm FB502 VRS-TV2AB000J 0 ohms,Jumper,1.25x2mm FB503 VRS-TV2AB000J 0 ohms,Jumper,1.25x2mm FB505 VRS-TV2AB000J 0 ohms,Jumper,1.25x2mm...
  • Page 113 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] RESISTORS VRS-CY1JB102J 1 kohms,1/16W VRS-CY1JB473J 47 kohms,1/16W R101 VRS-CY1JB102J 1 kohms,1/16W R102 VRS-CY1JB102J 1 kohms,1/16W R103 VRS-CY1JB222J 2.2 kohms,1/16W R104 VRS-CY1JB222J 2.2 kohms,1/16W R105 VRS-CY1JB332J 3.3 kohms,1/16W R106 VRS-CY1JB332J 3.3 kohms,1/16W...
  • Page 114 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] RESISTORS R540 VRS-CY1JB102J 1 kohms,1/16W R541 VRS-CY1JB101J 100 ohms,1/16W ( Use in XM Ready PWB-E ) R541 VRS-CY1JB472J 4.7 kohms,1/16W ( Use in Main PWB-A1 ) R542 VRD-ST2CD103J 10 kohms,1/6W...
  • Page 115 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] RESISTORS R732 VRD-ST2CD221J 220 ohms,1/6W R733 VRD-ST2CD221J 220 ohms,1/6W R734 VRD-ST2CD221J 220 ohms,1/6W R738 VRS-CY1JB102J 1 kohms,1/16W R739 VRS-CY1JB102J 1 kohms,1/16W R740 VRD-ST2CD102J 1 kohms,1/6W R741 VRS-CY1JB102J 1 kohms,1/16W R742...
  • Page 116 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] RESISTORS R913 VRG-ST2EC101J 100 ohms,1/4W,Fusible R914 VRN-VV3LAR22J 0.22 ohms,3W R915 VRN-VV3LAR22J 0.22 ohms,3W R916 VRN-VV3LAR10J 0.1 ohms,3W R917 VRN-VV3LAR10J 0.1 ohms,3W R918 VRS-CY1JB182J 1.8 kohms,1/16W R919 VRS-CY1JB182J 1.8 kohms,1/16W R920 VRD-ST2CD152J 1.5 kohms,1/6W...
  • Page 117 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [8] RESISTORS RD06 VRS-CY1JB222J 2.2 kohms,1/16W RD07 VRS-CY1JB332J 3.3 kohms,1/16W RD09 VRD-ST2CD182J 1.8 kohms,1/6W RD10 VRS-CY1JB222J 2.2 kohms,1/16W RD11 VRD-ST2CD332J 3.3 kohms,1/6W RD12 VRS-CY1JB562J 5.6 kohms,1/16W RD13 VRS-CY1JB103J 10 kohms,1/16W RD505...
  • Page 118 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [9] OTHER CIRCUITRY PARTS CNP501 QCNCWXC18AFZZ Socket,18 Pin ( Use in XM Ready PWB-E ) CNP502 QCNCM705BAFZZ Plug,2Pin CNP603 92LCONE5P53253 Plug,5Pin CNP701 QCNCWYP28AWZZ Socket,28 Pin CNP701A QCNCWYH28AWZZ Socket,28 Pin CNP702 QCNCWZY10AWZZ...
  • Page 119 CD-SW330 -MEMO-...
  • Page 120 CD-SW330 [10] CHANGER MECHANISM / CD MECHANISM PARTS 101x2 109-2 101x3 102x5 109-3 803x4 109-4 109-1 803x2 802x4 141 140 148 147 801x2 PWB-F...
  • Page 121 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [10] CHANGER MECHANISM / CD MECHANISM PARTS GCOVA1513AWZZ Disc Tray GCOVA1514AWZZ Guide Tray LANGG0008AWZZ Outer Tray Guide LANGG0009AWZZ Inner Tray Guide LCHSM0194AWZZ Main Base LHLDZA144AWZZ CD Mechanism Holder LPLTP0014AWZZ Top Plate...
  • Page 122 CD-SW330 [11] CABINET PARTS MECHANISM WITH CUSHION PWB-G 601x15 PWB-C PWB-B1 PWB-A1 PWB-E 601x2 PWB-B2 PWB-A2...
  • Page 123 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [11] CABINET PARTS CCABA6809AW01 Front Panel Ass'y 201-1 ----------------------- Front Panel 201-2 GCOVAA167AWSB Cover, Cassette [Tape 1] 201-3 GCOVAA168AWSB Cover, Cassette [Tape 2] 201-4 GDORF0127AWSA Holder, Cassette [Tape 1] 201-5 GDORF0128AWSA...
  • Page 124 CD-SW330 [12] FRONT SPEAKER BOX PARTS TWEETER SP3(L-CH) SP4(R-CH) SUPER TWEETER C1,2 Capacitor TWEETER SP3(L-CH) SP4(R-CH) C1,2 SUPER TWEETER Capacitor 2.2uF 250V WOOFER SP1(L-CH) WOOFER SP2(R-CH) SP1(L-CH) SP2(R-CH) FARBTABELLE FRONT SPEAKER LED PWB-D GRAU LED702(L-CH) LED703(R-CH) SDPB40F2A SCHWARZ R752A(L-CH) R752B(R-CH)
  • Page 125 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [12] FRONT SPEAKER BOX PARTS GBOXSA125AW01 Wooden Box Ass'y CPNLSA055AW04 Front Panel Ass'y TSPC-A694AWZZ Label, Specification LHLDZA177AWM1 Super Tweeter Ass'y PCUSGA020AWZZ Cushion, Foot XEBY730P10000 Screw, M3 x10mm XEPY740P16000 Screw, M4 X16mm...
  • Page 126 CD-SW330 [13] SUBWOOFER COLOR TABLE GRAY BLACK...
  • Page 127 CD-SW330 PRICE PART PARTS CODE DESCRIPTION RANK MARK RANK [13] SUBWOOFER GBOXSA070AW01 Wooden Box Ass'y CPNLSA030AW03 Front Panel Ass'y HDECQA136AWSB Cover, Edge Light HDECQA135AWSB Panel, Edge Light PCUSSA013AWZZ Port Cushion PCUSGA020AWZZ Cushion, Leg XEBY726P10000 Screw, M2.6x10mm XMBY740P16000 Screw, M4X16mm TSPC-A693AWZZ...
  • Page 128 CD-SW330 [14] ACCESSORIES / PACKING PARTS...
  • Page 129 CD-SW330...
  • Page 130 CD-SW330 -MEMO-...
  • Page 131 CD-SW330 -MEMO-...
  • Page 132 CD-SW330 A0703...

Table of Contents