..SATA or SAS RAID ... Lenovo Welcome....Configuring the Marvell BIOS Setup to enable Additional information resources .
Page 6
Windows Vista Business 64 Recovery CD . . Windows 7 Professional 64 Recovery CD . . Windows 7 Professional 64 with office starter 2010 Recovery CD ... ThinkStation Hardware Maintenance Manual...
This manual contains service and reference information for ThinkStation™ computers listed on the front cover. It is intended only for trained servicers who are familiar with Lenovo® computer products. Before servicing a Lenovo product, be sure to read the Safety Information in Chapter 2 “Safety information” on page 3.
Page 8
Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo's requirements and schedule in the EU. Products sold in 2005 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts.
Page 10
(This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. ThinkStation Hardware Maintenance Manual...
Voltage-selection switch Some computers are equipped with a voltage-selection switch located near the power-cord connection point on the computer. If your computer has a voltage-selection switch, ensure that you set the switch to match the voltage available at your electrical outlet. Setting the voltage-selection switch incorrectly can cause permanent damage to the computer.
Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: • English • Arabic • Brazilian/Portuguese • Chinese (simplified) • Chinese (traditional) ThinkStation Hardware Maintenance Manual...
Page 13
• French • German • Hebrew • Italian • Korean • Spanish DANGER Electrical current from power, telephone and communication cables is hazardous. To avoid a shock hazard: • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm.
Page 14
The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. ThinkStation Hardware Maintenance Manual...
Page 16
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) PERIGO ThinkStation Hardware Maintenance Manual...
Page 17
A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: • Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. •...
Page 18
O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação. ThinkStation Hardware Maintenance Manual...
Page 22
(sauf instruction contraire mentionnée dans les procédures d'installation et de configuration). • Lorsque vous installez, que vous déplacez, ou que vous manipulez le présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons. ThinkStation Hardware Maintenance Manual...
Page 23
Connexion Déconnexion 1. Mettez les unités HORS TENSION. 1. Mettez les unités HORS TENSION. 2. Commencez par brancher tous les cordons sur les 2. Débranchez les cordons d'alimentation des prises. unités. 3. Débranchez les câbles d'interface des connecteurs. 3. Branchez les câbles d'interface sur des connecteurs. 4.
Page 24
Schutzkontakt anschließen. • Die Signalkabel nach Möglichkeit einhändig anschließen oder lösen, um einen Stromschlag durch Berühren von Oberflächen mit unterschiedlichem elektrischem Potenzial zu vermeiden. • Geräte niemals einschalten, wenn Hinweise auf Feuer, Wasser oder Gebäudeschäden vorliegen. ThinkStation Hardware Maintenance Manual...
Page 25
• Die Verbindung zu den angeschlossenen Netzkabeln, Telekommunikationssystemen, Netzwerken und Modems ist vor dem Öffnen des Gehäuses zu unterbrechen, sofern in den Installations- und Konfigurationsprozeduren keine anders lautenden Anweisungen enthalten sind. • Zum Installieren, Transportieren und Öffnen der Abdeckungen des Computers oder der angeschlossenen Einheiten die Kabel gemäß...
Page 26
Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterbrechen, müssen alle zum Gerät führenden Netzkabel vom Netz getrennt werden. ThinkStation Hardware Maintenance Manual...
Page 28
• Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra. • Collegare alle prese elettriche appropriate tutte le apparecchiature che verranno utilizzate per questo prodotto. ThinkStation Hardware Maintenance Manual...
Page 29
• Se possibile, utilizzare solo una mano per collegare o scollegare i cavi di segnale. • Non accendere assolutamente apparecchiature in presenza di incendi, perdite d'acqua o danno strutturale. • Scollegare i cavi di alimentazione, i sistemi di telecomunicazione, le reti e il modem prima di aprire i coperchi del dispositivo, salvo istruzioni contrarie relative alle procedure di installazione e configurazione.
Page 30
Il pulsante di controllo dell'alimentazione presente sull'unità e l'interruttore dell'alimentatore non disattivano l'alimentazione corrente fornita all'unità. E' possibile che l'unità disponga di più cavi di alimentazione. Per disattivare l'alimentazione dall'unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione. ThinkStation Hardware Maintenance Manual...
Page 32
• Cualquier equipo que se conecte a este producto también debe conectarse a tomas de corriente debidamente cableadas. • Siempre que sea posible, utilice una sola mano para conectar o desconectar los cables de señal. • No encienda nunca un equipo cuando hay señales de fuego, agua o daños estructurales. ThinkStation Hardware Maintenance Manual...
Page 33
• Desconecte los cables de alimentación, los sistemas de telecomunicaciones, las redes y los módems conectados antes de abrir las cubiertas de los dispositivos, a menos que se indique lo contrario en los procedimientos de instalación y configuración. • Conecte y desconecte los cables, como se describe en la tabla siguiente, cuando instale, mueva o abra las cubiertas de este producto o de los dispositivos conectados.
Page 34
Además, el dispositivo podría tener más de un cable de alimentación. Para suprimir toda la corriente eléctrica del dispositivo, asegúrese de que todos los cables de alimentación estén desconectados de la toma de corriente. ThinkStation Hardware Maintenance Manual...
This chapter provides general information that applies to all machine types supported by this publication. Lenovo ThinkVantage Tools Note: The Lenovo ThinkVantage Tools program is only available on computers with the Windows 7 operating system from Lenovo. The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easy access to various tools, such as: •...
Page 36
– Low range: Minimum: 100 V ac Maximum: 127 V ac Input frequency range: 50 to 60 Hz – High range: Minimum: 200 V ac Maximum: 240 V ac Input frequency range: 50 to 60 Hz ThinkStation Hardware Maintenance Manual...
Page 38
6. Have the same diagnostic diskettes (version) 7. Have the same configuration options set in the system 8. Have the same setup for operating-system-controlled files Comparing the configuration and software set-up between “working and non-working” systems will often lead to problem resolution. ThinkStation Hardware Maintenance Manual...
2. If you are unable to isolate and repair the problem yourself after running the programs, save and print the log files created by the programs. You will need the log files when you speak to a Lenovo technical support representative.
You can also download the latest version of the PC-Doctor for DOS diagnostic program from http://www.lenovo.com/support. The PC-Doctor for DOS diagnostic program runs independently of the Windows operating system. Use the PC-Doctor for DOS diagnostic program if you are unable to start the Windows operating system.
Page 41
Run Normal Test runs a more extensive set of tests than Run Quick Test does and takes longer to complete. • Press F5 to automatically run all selected tests in all categories. • From within a test category, press Ctrl+Enter to automatically run only the selected tests in that category. •...
Page 42
To view details of a failure or to view a list of test results, use the following procedure from any test category screen: 1. Press F3 to activate the log file. 2. Press F3 again to save the file to diskette or press F2 to print the file. ThinkStation Hardware Maintenance Manual...
Note: A password can be any combination of up to 12 (1 to 12) alphabetic and numeric characters. For more information, see “Password considerations” on page 38. Enabling or disabling a device This section provides instructions on how to enable or disable user access to a device. ThinkStation Hardware Maintenance Manual...
USB Support Use this option to enable or disable USB connectors. ICH SATA When this feature is set to Disabled, any optical drives or eSATA devices are disabled and will not be displayed in the system configuration. Marvell SATA/SAS controller When this feature is set to Disabled, all internal hard disk drives are disabled and will not be displayed in the system configuration.
• If you do not want to save the new settings, select Exit ® Exit the Setup Utility without saving. • If you want to return to the default settings, press F9 or select Exit ® Load Default Settings. ThinkStation Hardware Maintenance Manual...
Note: Your computer must have either all SATA hard disk drives or all SAS hard disk drives installed. However, be sure that you do not install both the SATA and SAS hard disk drives into the same computer. ThinkStation Hardware Maintenance Manual...
Installing SATA or SAS hard disk drives Your computer must have the minimum number of SATA or SAS hard disk drives installed for the supported level of RAID below: • RAID Level 0 – Striped disk array – Two hard disk drives minimum –...
4. Use the arrow keys and the Enter key to select the array you want to delete from the list. 5. Use the arrow keys to select Next and press Enter. 6. Press Y when prompted to complete the deletion. ThinkStation Hardware Maintenance Manual...
Information only Restart the test, if necessary 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 1. Press F3 to review the log file. 2. Restart the test to reset the log file. ThinkStation Hardware Maintenance Manual...
Page 53
Diagnostic Error Code FRU/Action 1. Make sure the component that is called out is 000-197-XXX BIOS test warning connected and/or enabled. See Chapter 6 “Using the Setup Utility program” on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement 4.
Page 54
2. System board 001-270-XXX System IRQ3 failure 1. Device on IRQ3 2. System board 001-271-XXX System IRQ4 failure 1. Device on IRQ4 2. System board 001-272-XXX System IRQ5 failure 1. Device on IRQ5 2. System board ThinkStation Hardware Maintenance Manual...
Page 55
Diagnostic Error Code FRU/Action 001-273-XXX System IRQ6 (diskette drive) failure 1. Diskette Cable 2. Diskette drive 3. System board 001-274-XXX System IRQ7 failure 1. Device on IRQ7 2. System board 001-275-XXX System IRQ8 failure 1. Device on IRQ8 2. System board 001-276-XXX System IRQ9 failure 1.
Page 56
3. Go to “Undetermined problems” on page 67. 005-199-XXX Video test failed, cause unknown 1. Go to “Undetermined problems” on page 67. 2. Flash the system and re-test. See “Updating (flashing) the BIOS” on page 231. 3. Replace component under function test. ThinkStation Hardware Maintenance Manual...
Page 57
Diagnostic Error Code FRU/Action 005-2XX-XXX 005-3XX-XXX Video subsystem error 1. Video card, if installed 2. System board 006-000-XXX Diskette interface Test Passed No action 006-0XX-XXX Diskette interface error 1. Diskette drive Cable 2. Diskette drive 3. System board 006-195-XXX Diskette interface Test aborted by user Information only Restart the test, if necessary 006-196-XXX Diskette interface test halt, error threshold 1.
Page 58
014-195-XXX Parallel port Test aborted by user Information only Restart the test, if necessary. 014-196-XXX Parallel port test halt, error threshold 1. Press F3 to review the log file. exceeded 2. Restart the test to reset the log file. ThinkStation Hardware Maintenance Manual...
Page 59
Diagnostic Error Code FRU/Action 014-197-XXX Parallel port test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6 “Using the Setup Utility program” on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement.
Page 60
3. Go to “Undetermined problems” on page 67. 018-199-XXX PCI Card test failed, cause unknown 1. Go to “Undetermined problems” on page 67. 2. Flash the system and re-test. See “Updating (flashing) the BIOS” on page 231. 3. Replace component under function test. ThinkStation Hardware Maintenance Manual...
Page 61
Diagnostic Error Code FRU/Action 018-250-XXX PCI Card Services error 1. PCI card 2. Riser card, if installed. 3. System board 020-000-XXX PCI Interface Test Passed No action 020-0XX-XXX PCI Interface error 1. PCI card 2. Riser card, if installed. 3. System board 020-195-XXX PCI Test aborted by user Information only Restart the test, if necessary 020-196-XXX PCI test halt, error threshold exceeded...
Page 62
030-03X-XXX 030-04X-XXX SCSI interface error 1. SCSI signal cable 2. Check power supply 3. SCSI device 4. SCSI adapter card, if installed. 5. System board 030-195-XXX SCSI interface Test aborted by user Information only Restart the test, if necessary. ThinkStation Hardware Maintenance Manual...
Page 63
Diagnostic Error Code FRU/Action 030-196-XXX SCSI interface test halt, error threshold 1. Press F3 to review the log file. exceeded 2. Restart the test to reset the log file. 030-197-XXX SCSI interface test warning 1. Make sure the component that is called out is connected and/or enabled.
Page 64
080-195-XXX Game Port interface Test aborted by user Information only Restart the test, if necessary. 1. Press F3 to review the log file. 080-196-XXX Game Port interface test halt, error threshold exceeded 2. Restart the test to reset the log file. ThinkStation Hardware Maintenance Manual...
Page 65
Diagnostic Error Code FRU/Action 1. Make sure the component that is called out is 080-197-XXX Game Port interface test warning connected and/or enabled. See Chapter 6 “Using the Setup Utility program” on page 37. 2. Re-run test. 3. Replace the component that is called out in warning statement.
Page 66
See Chapter 6 “Using the Setup Utility program” on page 37. 2. Flash the system and re-test. See “Updating (flashing) the BIOS” on page 231. 3. Go to “Undetermined problems” on page 67. ThinkStation Hardware Maintenance Manual...
Page 67
Diagnostic Error Code FRU/Action 170-199-XXX Voltage Sensor(s) test failed, cause unknown 1. See “Undetermined problems” on page 67. 2. Flash the system and re-test. See “Updating (flashing) the BIOS” on page 231. 3. Replace component under function test. 1. Power supply 170-250-XXX 170-251-XXX Voltage Sensor(s) Voltage limit error 2.
Page 68
No action 302-000-XXX Mouse Test Passed No action 302-XXX-XXX Mouse error 1. Mouse 2. Check and test Keyboard. 3. System board 303-000-XXX Joystick Test Passed No action 303-XXX-XXX Joystick error Remove the Joystick and re-test the system. ThinkStation Hardware Maintenance Manual...
Diagnostic Error Code FRU/Action No action 305-000-XXX Monitor DDC Test Passed 305-250-XXX Monitor DDC self test failure 1. Run the Setup Utility program to enable DDC. 2. Cable 3. Monitor 4. Video card 5. System board 415-000-XXXModem Test Passed No action 415-XXX-XXX Modem error Remove the Modem and re-test the system.
Setup to HALT ON ALL, BUT KEYBOARD. The BIOS then ignores the missing keyboard during POST. Memory Test: This message displays during a full memory test, counting down the memory areas being tested. ThinkStation Hardware Maintenance Manual...
POST Error Message Description/Action Memory test fail If POST detects an error during memory testing, additional information appears. This information gives specifics about the type and location of the memory error. Press TAB to show POST screen Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen.
Page 72
RPL computer does not RPL from server 1. Check startup sequence. 2. Check the network adapter LED status. Serial or parallel port device failure (system board port) 1. External Device Self-Test OK? 2. External Device 3. Cable 4. System Board ThinkStation Hardware Maintenance Manual...
Message/Symptom FRU/Action Serial or parallel port device failure (adapter port) 1. External Device Self-Test OK? 2. External Device 3. Cable 4. Alternate Adapter 5. System Board 1. Keyboard Some or all keys on the keyboard do not work 2. Keyboard Cable 3.
Figure 3 “Component locations” on page 71 shows the locations of the various components in your computer. To remove the computer cover and access the inside of the computer, see “Removing the computer cover” on page 74. ThinkStation Hardware Maintenance Manual...
Figure 3. Component locations Microprocessor 1 Hard disk drive bay Memory modules Hard disk drives (3) Heat sink and fan assembly 2 System board Microprocessor 2 Power supply assembly Optical drive bracket PCI card Optical drive Heat sink and fan assembly 1 Internal Speaker Rear fan assemblies (2) Front fan assembly bracket...
Page 78
Auxiliary 12 V power connector Front USB connector Left rear fan connector Front IEEE 1394 connector CPU 1 12 V power connector Hard disk drive connectors (5) CPU 1 fan connector Microprocessor 1 Optical drive connectors (3) Battery ThinkStation Hardware Maintenance Manual...
Page 79
Figure 5 “System board part and connector locations” on page 73 shows the locations of the parts and connectors on the other type of system board. Figure 5. System board part and connector locations CPU 1 memory slots (3) Clear CMOS (Complementary Metal Oxide Semiconductor) /Recovery jumper CPU 1 memory fan connector Thermal sensor connector...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 84
, pivot the fan duct, and then disengage the rear of the fan duct. Note: Not all computer models have the memory fan duct and blue shipping clip. ThinkStation Hardware Maintenance Manual...
Page 85
Figure 11. Removing the memory fan duct 7. Open the retaining clips as shown. Figure 12. Opening the retaining clips If you are replacing an old memory module, open the retaining clips and gently pull the memory module out of the memory slot. Figure 13.
Page 86
8. Position the new memory module over the memory slot. Make sure that the notch on the memory module aligns correctly with the key in the memory slot. Push the memory module straight down into the slot until the retaining clips close. ThinkStation Hardware Maintenance Manual...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 88
5. Remove the new PCI card from its static-protective package. 6. Install the new PCI card into the appropriate slot on the system board. See “Locating parts and connectors on the system board” on page 71. ThinkStation Hardware Maintenance Manual...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 90
Figure 20. Connecting the signal cable to a SAS hard disk drive 8. Slide the new hard disk drive with the bracket and the signal cable into the hard disk drive bay until it snaps into position. ThinkStation Hardware Maintenance Manual...
Page 91
Figure 21. Installing a new hard disk drive 9. Locate one of the extra five-wire power cables and connect it to the new hard disk drive. Note: You might need to disconnect power cables for other hard disk drives installed in your computer and then rotate the air flow wall outward for easier access to the rear of the new hard disk drive.
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 94
Connect the signal cable to the rear of the new optical drive. Note: If you want to replace the signal cable, remove the PCI card holder. See “Removing and reinstalling the PCI card holder” on page 76. Then, disconnect the old signal cable from the system ThinkStation Hardware Maintenance Manual...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 96
, and then fully remove screw Note: Carefully remove the four screws from the system board to avoid any possible damage to the system board. The four screws cannot be removed from the heat sink and fan assembly. ThinkStation Hardware Maintenance Manual...
Page 97
Figure 28. Removing the heat sink and fan assembly 8. Carefully lift the heat sink and fan assembly off the system board. Notes: a. You might have to gently twist the heat sink and fan assembly to free it from the microprocessor. b.
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 99
Notes: a. Note the orientation of the notches on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 101
14. Remove the six screws that secure the system board to the chassis. Figure 29. Removing the six screws that secure the system board to the chassis 15. Carefully lift the failing system board out of the chassis. Chapter 9 Replacing FRUs...
Page 102
3. Align the notches of the microprocessor socket cover with the alignment keys of the microprocessor socket. Lower the socket cover straight down into the microprocessor socket on the system board. ThinkStation Hardware Maintenance Manual...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support.
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support.
Page 105
This document provides instructions on how to replace the power supply assembly. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
Page 106
9. Remove the three screws that secure the side cover as shown in the following illustration. Figure 31. Removing the side cover screws 10. Remove the other six screws that secure the side cover as shown in the following illustration. Then, lift the side cover and remove it from the computer. ThinkStation Hardware Maintenance Manual...
Page 107
Figure 32. Removing the side cover 11. Disconnect the power supply assembly cables from the system board and the drives. In some models, you might need to disconnect the power supply assembly cables from the Peripheral Component Interconnect (PCI) cards. 12.
Page 108
16. Route the three power supply assembly cables through the two clips on the bottom of the hard disk drive cage following the inverse numerical sequence. Then, route the cables through the other two clips on the side of the hard disk drive cage following the numerical sequence. ThinkStation Hardware Maintenance Manual...
Replacing the front fan assembly Attention Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy Chapter 9 Replacing FRUs...
Page 110
ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the front fan assembly. Note: Not all computers have the front fan assembly. To replace the front fan assembly, do the following: 1.
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support...
Page 112
Note: The new rear fan assembly you received will have four new rubber mounts attached. 9. Pull on the tips of the rubber mounts until the rear fan assembly is secured in place. ThinkStation Hardware Maintenance Manual...
Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkStation Safety and Warranty Guide, go to: http://www.lenovo.com/support.
Page 114
8. Gently pull the internal speaker a little bit outward to release its bottom from the chassis. Then, slide the internal speaker towards the top of the chassis to completely remove it. Figure 39. Removing the internal speaker 9. Slide the new internal speaker into the metal internal speaker slot. ThinkStation Hardware Maintenance Manual...
Figure 40. Installing the new internal speaker 10. Connect the new internal speaker cable to the system board. See “Locating parts and connectors on the system board” on page 71. 11. Go to “Completing the parts replacement” on page 109. Completing the parts replacement After completing the installation or replacement for all parts, you need to reinstall the computer cover and reconnect cables.
Page 116
Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 37. Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit (CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
Windows XP Professional FRU # Traditional Chinese • MT 4262: CTO • MT 4263: CTO • MT 4264: CTO 03T0413 • MT 4265: CTO • MT 4266: CTO • MT 4269: CTO • MT 4272: CTO Traditional Chinese Hong Kong •...
Windows Vista Business 64 Recovery CD Windows Vista Business 64 FRU # English • MT 4262: CTO • MT 4263: CTO • MT 4264: CTO 64Y5664 • MT 4265: CTO • MT 4266: CTO • MT 4269: CTO • MT 4272: CTO Russian English •...
• To determine the current Level of BIOS: – Start the Setup Utility program. • Sources for obtaining the latest level BIOS available 1. Lenovo support web site: http://www.lenovo.com/support 2. Lenovo Customer Support Center 3. Levels 1 and 2 Support To update (flash) the BIOS, see “Updating (flashing) the BIOS”...
Updating (flashing) the BIOS from your operating system Note: Because Lenovo makes constant improvements to its Web sites, the Web page contents are subject to change without notice, including the contents referenced in the following procedure.
(LAN). System memory speed The Intel Xeon microprocessor families compatible with this ThinkStation computer feature an integrated memory controller, which provides the microprocessor with direct access to the system memory. Because of this design, the system memory speed will be determined by a number of factors, including the microprocessor model and the type, speed, size (capacity), and number of DIMMs installed.
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Macrovision Corporation. Reverse engineering or disassembly is prohibited. European conformance CE mark The emission notices information is available in the ThinkStation Safety and Warranty Guide that came with your computer. Trademarks...
Page 246
(flashing) the BIOS updating (flashing) the BIOS user, password using passwords Setup Utility program viewing and changing settings ThinkStation Hardware Maintenance Manual...
Page 248
Part Number: 89Y7336 Printed in USA (1P) P/N: 89Y7336 *89Y7336*...