About Incoming Call Log - Fujitsu IP Pathfinder S User Manual

4CALLLOG

ABOUT INCOMING CALL LOG

This is using 「CALLER ID SAVE DIAL」 of PBX's service function.
● You can save manually the caller ID in two-party conversation at the outside line.
● The caller ID can register up to 8 telephone numbers per a telephone, and can
memorize up to 15 digits a telephone number.
● If the INCOMING CALL LOG has already been registered 8 telephone numbers at
'the automatic save function' and 'the manual save function', the oldest
telephone number is deleted.
● The automatic save function can work in the incoming call from the various
outside line. (direct in-line, direct line, floating line, dial-in, ISDN dial-
in, addition number dial-in, caller ID dial-in). However, the direct line and
the floating line is saved automatically when you answer a call.
● The automatic save function and the manual save function is set with the
special number (The example:130, 1(automatic operation), and 0(manual operation)).
● Please contact the purchased shop about the setting of the caller ID save dial.
● If you press 0 dial when the incoming call log was displayed, the displayed
incoming call log is deleted and the next incoming call log is displayed.
● If you lift a handset when you receive an incoming call while incoming call
log is displayed, you can't answer a call. Please lift a handset after pushing
the 「caller ID save / display」 button whenever answering.
■ Method of operating the incoming call log
1 Press the CALLER ID SAVE / DISPLAY button.
The telephone changes the screen of the incoming call log, and
display the telephone number of the incoming call log.
2 Press ▲ button or ▼ button.
Please press the button until a desired telephone number is
displayed.
3 Y ou lift the handset or press the speaker button if a
desired telephone number is displayed.
The conversation begins when the calling party answers.
If you discontinue calling from INCOMING CALL LOG, you replace the
handset or press the speaker button.

0441234567