KitchenAid 30" Installation Instructions And Use & Care Manual page 5

Product Dimensions
Interior-mounted blower motor model
13¹⁄₂" (34.3 cm)
retractable
vent height
27" (68.6 cm) for 30" (76.2 cm) vent
33" (83.8 cm) for 36" (91.4 cm) vent
Terminal box cover
13" (33.0 cm)
13" (33.0 cm)
6" (15.2 cm)
diameter
vent collar
Cabinet Dimensions
Interior-mounted blower motor model
A= ¹⁄₂" (12.7 mm)
minimum
21⁵⁄₁₆"
(54.1 cm)
All cutouts are
for 6" (15.2 cm)
diameter vent
system.
Locate power
supply junction
box at lower
left hand
rear corner
of the cabinet.
NOTES:
See cooktop manufacturer's instructions for cooktop cutout
depth and width.
Use dimensions for vent system cutout location that applies
to your installation.
Interior mounted blower systems connect with 6" (15.2 cm)
round vent. The cutout locations for this vent system will
depend on your specific installation.
Top trim widths:
30¹⁄₄" (76.8 cm) for 30" (76.2 cm) vent
36¹⁄₄" (92.1 cm) for 36" (91.4 cm) vent
1¹⁄₂" (3.8 cm)
³⁄₈" (0.95 cm)
28³⁄₄"
(73.0 cm)
³⁄₄"
(1.9 cm)
9¹⁄₄"
(23.5 cm)
2¹⁄₈" (5.4 cm)
7⁵⁄₈" (19.4 cm)
23³⁄₄"
(60.3 cm)
21⁵⁄₁₆"
(54.1 cm)
Centerline of cooktop cutout
Exterior-mounted blower motor model -
used with Part Number KPEC992M
13" (33.0 cm)
6¹⁄₂"
(16.5 cm)
10" (25.4 cm)
diameter
vent collar
13" (33.0 cm)
Exterior-mounted blower motor model
¹⁄₂" (12.7 mm)
minimum
Locate power
supply junction
box at lower
left hand
rear corner
of the cabinet.
NOTES:
See cooktop manufacturer's instructions for cooktop cutout
depth and width.
Exterior-mounted blower systems connect with 10" (25.4 cm)
round vent. The cutout locations for this vent system will
depend upon your specific installation.
¹⁄₄" (0.6 cm)
6¹⁄₂"
³⁄₄" (1.9 cm)
(16.5 cm)
5